maXTouch 640-node Touchscreen Controller Product Brief

2021-11-23
■Description
● The mXT640U uses a unique charge-transfer acquisition engine to implement Microchip’s patented capacitive sensing method. Coupled with a state-of-the-art CPU, the entire touchscreen sensing solution can measure, classify and track a number of individual finger touches with a high degree of accuracy in the shortest response time. The mXT640U allows for both mutual and self capacitance measurements, with the self capacitance measurements being used to augment the mutual capacitance measurements to produce reliable touch information.
■maXTouch® Adaptive Sensing Touchscreen Technology
● Up to 32 X (transmit) lines and 20 Y (receive) lines
● A maximum of 640 nodes can be allocated to the touchscreen
● Touchscreen size of 9.66 inches (16:10 aspect ratio), assuming a sensor electrode pitch of 6.5 mm. Other sizes may be possible with different electrode pitches and appropriate sensor material
● Multiple touch support with up to 16 concurrent touches tracked in real time
● Dual-boot OS support for Microsoft® Windows® and Android
■Touch Sensor Technology
● Discrete/out-cell support including glass and PET film-based sensors
● On-cell/touch-on display support including TFT, IPS and OLED
● Synchronization with display refresh timing capability
● Support for standard (for example, Diamond) and proprietary sensor patterns (review of designs by Microchip recommended)
■Front Panel Material
● Works with PET or glass, including curved profiles (configuration and stack-up to be approved by Microchip)
● Glass 0.4 mm to 4.5 mm, dependent on screen size, touch size and stack-up
● Plastic 0.2 mm to 2.2 mm, dependent on screen size, touch size and stack-up
■Touch Performance
● Moisture/Water Compensation
◆No false touch with condensation or water drop up to 22 mm diameter
◆One-finger tracking with condensation or water drop up to 22 mm diameter
● Glove Support
◆Multiple-finger glove touches up to 1.5 mm thickness (subject to stack-up design)
◆Single-finger glove touch up to 5 mm thickness (subject to stack-up design)
● Mutual capacitance and self capacitance measurements supported for robust touch detection
● Noise suppression technology to combat ambient, charger noise, and power-line noise
◆Up to 240 V-pp between 1 Hz and 1 kHz sinusoidal waveform
◆Up to 20 V-pp between 1 kHz and 1 MHz sinusoidal waveform
● Stylus Support
◆Supports passive stylus with 1 mm contact diameter, subject to configuration, stack up, and sensor design
● Scan Speed
◆Up to 250 Hz one finger reporting rate, subject to configuration
◆Typical report rate for 10 touches ≥100 Hz (subject to configuration)
◆Initial touch latency <20 ms for first touch from idle, subject to configuration
◆Configurable to allow for power and speed optimization
■On-chip Gestures
● Supports wake up/unlock gestures, including symbol recognition

Microchip

mXT640UmaXTouch 640-nodeATMXT640U-CCU001ATMXT640U-CCUR001

More

Part#

Touchscreen Controller

More

More

Supplier and Product Introduction

More

More

Please see the document for details

More

More

UFBGA

English Chinese Chinese and English Japanese

November 2020

Revision B

193 KB

- The full preview is over. If you want to read the whole 12 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: