NVT4858 SD, SDIO, mini SD, micro SD and SIM card voltage level translator with EMI filter and ESD protection
The device is an SD 3.0-compliant bidirectional dual voltage level translator with auto-direction control. It is designed to interface between a memory or SIM card operating between 1.65 V to 3.6 V signal levels and a host with a supply voltage of 1.08 V to 1.95 V.The device supports SD 3.0 SDR104, SDR50, DDR50, SDR25, SDR12 and SD 2.0 High-Speed (50 MHz) and Default-Speed (25 MHz) modes. The device has an auto-enable/disable function connected to the VCCB supply pin, built-in EMI filters and robust ESD protections (IEC 61000-4-2, level 4) on VCCB or any of the card side pins. External ESD diodes are not required.This device also supports SIM card voltage level translator using CLK and two of the data lines for SD and SIM card combo sockets.
■Features
●Supports up to 208 MHz clock rate
●SD3.0 specification-compliant voltage translation to support SDR104, SDR50, DDR50,SDR25, SDR12, High-Speed and Default-Speed modes
●Compliant with all ETSI, IMT-2000 and ISO-7816 SIM/Smart Card interface requirements
●Support SD/SIM card supply voltages with range of 1.65V to 3.6V
●Host microcontroller operating voltage range: 1.08 V to 1.95 V
●Feedback channel for clock synchronization
●Low power consumption by push-pull output stage with break-before-make architecture
●Automatic enable and disable through VCCB
●Integrated pull-up and pull-down resistors: no external resistors required
●Integrated EMI filters suppress higher harmonics of digital I/Os
●Integrated 8 kV ESD protection according to IEC 61000-4-2, level 4 on on VCCB or any of the card side pins. External ESD diodes are not required.
●Level shifting buffers keep ESD stress away from the host (zero-clamping concept)
●Available in XQFN16 with 0.4 mm pitch and WLCSP16 with 0.35 mm pitch.
[ Smart phones ][ Mobile handsets ][ Digital cameras ][ Tablet PCs ][ Laptop computers ][ SD, MMC or microSD card readers ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
WLCSP16;XQFN16 |
|
English Chinese Chinese and English Japanese |
|
15 September 2021 |
|
Rev. 2.0 |
|
|
|
641 KB |
- +1 Like
- Add to Favorites
Recommend
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
- C-V2X Certification – Necessary or Just Nice to Have?
- Runic Technology Participates in the 2021 ASPENCORE Double Summit
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.