VNA Master™ MS202xB Programming Manual
◆MS2028B Vector Network Analyzer 5 kHz to 20 GHz
◆About this Manual
■This SCPI Programming Manual provides information for remote operation of the MS202xB VNA Master Vector Network Analyzer (MS2026B and MS2028B) using commands sent from an external controller via Ethernet or USB connection. This Programming Manual includes the following:
●An overview of Ethernet and USB connection to the MS202xB
●An overview of Standard Commands for Programmable Instruments (SCPI) command structure and conventions
●The IEEE common commands that are supported by the MS202xB
●A complete listing and description of all the SCPI commands that can be used to remotely control functions of the VNA Master. These commands are organized by instrument mode and are listed in Chapter 6, "All Mode Commands".
■This manual is intended to be used in conjunction with the MS202xB VNA Master Vector Network Analyzer User Guide, Anritsu Part Number 10580-00220. Refer to that manual for general information about the MS202xB, including equipment setup and operating instructions.
◆Introduction
■This chapter provides a general description of remote programming setup, Ethernet and USB interface connections, and cable requirements.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
January 2010 |
|
|
Revision: C |
|
|
10580-00221 |
|
|
11.3 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
