i.MX 8M Mini Migration Guide: Migrating from i.MX 8M to i.MX 8M Mini
●Purpose:
■This application note introduces the i.MX 8M Mini architecture by highlighting the differences from the i.MX 8M series processor upon which it is based. This document is a migration guide for developers that migrate from the i.MX 8M to the i.MX 8M Mini processor.
●Scope:
■The i.MX 8M Mini architecture introduces new features which are different from the i.MX 8M. The i.MX 8M Mini also removes some features from i.MX 8M. The key differences include:
▲Reduced the package size from 17×17 mm, 0.65 mm pitch to 14×14 mm, 0.5 mm pitch.
▲Optimized power consumption.
▲Increased Arm® Cortex®-A53 core platform frequency
▲Increased Arm® Cortex®-M4 target frequency
▲Removed display controller subsystem (DCSS), so HDR and Dolby vision is not supported.
▲GPU 3D changed from GC7000 lite to GCNanoUltra, Single Shader support, OpenCL/Open Vision/Vulkan is not natively supported.
▲Added 2D engine GC320, can use 2D for Color Space Conversion (CSC) and buffer transfers.
▲Added one video encoder, the decoder performance is 1080p60.
▲Added PDM audio input support.
▲Supported 192 kHz audio on SPDIF interface.
▲Increased lanes on SAI-2/3 from 1TX+1RX to 2TX+2RX lanes, with support for 768 kHz audio.
▲Changed 2×USB3.0 to 2 ×USB2.0.
▲Removed second PCIE and second MIPI CSI, do not affect the software.
▲Removed HDMI interface.
▲Added third SD/eMMC interface.
▲Added third SDMA for audio interface.
■Due to a close alignment to the i.MX 8M design, this document is structured as a summary of changes to the i.MX 8M Mini features. It provides references to modules that are reused or modified on the i.MX 8M Mini.
●Audience:
■This document is intended for system integrators and software developers migrating from the platforms based on the i.MX 8M.
|
|
Application note & Design Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
4 April 2019 |
|
Rev. 0 |
|
AN12296 |
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
- Unleashing the Potential of i.MX 8M Mini in Industrial and Medical Applications
- Ultra-Low IQ PMIC from ROHM Selected to Power NXP iMX8M Nano for High Performance Embedded Artists Industrial Control Board
- Nxp Licenses Advanced TMR Sensor Technology From Crocus Technology
- Keysight, NXP Collaborate to Advance Development of 5G Fixed Wireless Access (FWA) Solutions Enables technology providers to verify CPE
- AEC-Q100 Qualified Clock Generator Adopted on NXP S32G Automotive Network Processor Reference Design
- Alliance Memory Launched 8M Low-Power CMOS SRAM With 2.7-V to 3.6-V Power Supply in TSOP-I Package
- MiniSKiiP®PIM and MiniSKiiP®PACK with IGBT M7 - for Real Chip-level Multi Sourcing
- Alliance Memory Launched Two 8M Fast CMOS SRAMs AS7C38096A and AS7C38098A in 44-Pin TSOP-II and 48-Ball TFBGA Packages
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.