Defense Connectivity Solutions
2021-11-11
●Connectors:
▲High Speed Vita Backplane
■Fully footprint compatible with VITA 46/48 standards
■Flexible modular design for standard 3U, 6U and custom configurations
■100 Ω impedance for differential pair configurations
■Data rate performance up to 10 Gbps
▲High Speed Copper
■Standard 100 & 150Ω quadrax & twinax contacts
■Micro twinax and quadrax connectors
■Rugged D-Sub, ARINC and MIL-DTL-38999 standard quadrax and twinax
■Data rates up to 6.25 Gbps
■Reverse gender quadrax contacts
▲Rugged 2mm Backplane
■NASA GSFC qualified
■High-temp LCP insulator meeting outgassing requirements
■Reverse gender to commercial 2mm products
■Keying feature ensures proper mating
■Modular design for 3U/6U configurations
▲PCB Interposers
■Low profile, high compliance ratio
■Compression mount termination options
■Mixed signals and functionality designed into a single connector
■Integrated alignment, latching and sealing featuresPCB Interposers
■Low profile, high compliance ratio
■Compression mount termination options
■Mixed signals and functionality designed into a single connector
■Integrated alignment, latching and sealing features
▲High Density LRM PCB
■Line removable module (LRM) connector, available in 132 through 594 positions
■Includes signal, power, fiber optic & coax options
■Conforms to MIL-DTL-55302 general requirements
■High density: 6-row chevron grid layout, 1.905 mm pitch, 0.6 mm pin dia.
▲Signal & Power PCB
■Available with hyperboloid and spring probe contact technologies
■Ranges from 17 to 490 contacts, with straight dip, right angle solder, crimp, solder cup and wire wrap termination options
■Guiding devices with or without polarization (16 keys available)
■Front release, rear removable contacts
▲Quick Release Miniature
■Lightweight, robust, quick release, miniature size
■Exceptional signal integrity
■Spring loaded contacts
■IP67 sealing, circular or rectangular options, with or without over-molding and cabling
■Designed for extreme environmental conditions
▲EMI/EMP Filter
■MIL-DTL-38999, ARINC 600 compatible
■Intermateable and interchangeable with standard non-filter connectors
■Butt-joint and expanded beam
■TVS protection meeting the requirements of RTCA D160 section 22 up to level 5
▲Fiber Optic
■Butt-joint and expanded beam
■Floating design (<-0.5dB), low loss fiber options
■MIL-DTL-38999, ARINC 600 compatible
■PC or APC ferrule end face
▲High Power Circular
■Current rating 300 A and 500 A
■High power capabilities in a small size
■Push lock to mate connector
■Rugged metal shell
■360° EMI/RFI shielding option
■RoHS Compliant
▲RF Coax/Triax
■Spring loaded for optimum contact mating force
■Low VSWR
■Size 8: 1.15:1 Typ Mated Pair, Size 12; 1.25:1
■Insertion Loss: 0.15dB to 26.5 GHz Typ (Size 8) and 0.2dB to 40 GHz Typ (Size 12)
▲Fiber Optic ARINC 801
■Compatible with multi-mode and single-mode fiber
■Standard 1.25 mm ferrule and sleeve
■Cable termination identical to LC connector process
■Standard MIL-DTL-38999 and ARINC 600 Size 16
●Fiber Optics & RF Components:
▲Coaxial Isolators
■Wide range of isolators, circulators, loads, terminations, and attenuators
■Designed to operate from 300 MHz to 26 GHz
■Unique solid connectors available including female & male orientations, and SMA, TNC & SMP styles
■Male/ female connector barrel machined to be integrated in housing
■Optimized for thermal and dynamic operational environments
▲Microstrip, Surface Mount & Stripline Isolators & Circulators
■Operating in assigned bands from 400 MHz to 31 GHz
■Used in a variety of interfaces including MIC, tabbed, and SMD interfaces
■Microstrip offers a unique blend of broad band operation, low mass and low profile
■Surface mount and stripline suitable for pick and place and reflow soldering
▲RF Components
■Innovative design and material maximize power-to-size ratio
■Low and high power designs from 0.1 to 800W
■Alumina, ALN, BeO and CVD substrates
■Wide range of resistance values
■High precision and reliabilityDiamond RF Resistives
▲Waveguides
■Isolators, circulators, combiners, couplers, loads, transitions, terminations, & multi-function assemblies
■Full waveguide band isolators and circulators WR-42-WR-05 (18-220 GHz)
■High power waveguide circulators / isolators for protecting TWTs up to 100 GHz
■Breadth of passive products operate from 1.0 GHz to 325 GHz
■High power devices are supplied as junction or differential phase shift types
■Guaranteed low and stable insertion loss under maximum power
▲Attenuators
■Product versions from DC to 50 GHz
■Excellent RF broadband performance
■50 years of proven space and military heritage
■Footprint compatibility with Thermopad®
■Surface mount, wire bond, tab, flange and coaxial configurations
▲Diamond RF Resistives
■High power-to-size ratings to 300W
■Excellent peak power performance
■Extremely low parasitic capacitance
■Super compact form factor
■Space and military qualified
▲Optical VPX Interconnects
■Blind-mate backplane interconnects for embedded computing systems
■10 Gbps and 28 Gbps optical modules in small-SWaP ruggedized packages
■Mechanical Transfer (MT) ferrule with linear array of 24 parallel multimode fibers
■Designed following VITA 66.5 standard
■Rugged solution, MIL-STD 883/202/810 qualified
▲Optical Embedded Transceivers
■12-channel TX and 12-channel RX
■Multimode 850 nm wavelength laser
■Over 100 m reach on OM3 ribbon fiber
■Standard MT parallel fiber connector
■Surface mountable or pluggable
■MIL-STD 883/202/810 qualified, radiation tested
▲RF Filters
■RF Filters, Multiplexers, Switched Filter Banks, and Integrated assemblies, from 100 KHz to 65 GHz
■Bandpass, lowpass, highpass, notch, diplexed & multiplex options
■Small footprint and light weight
■Surface mountable for pick and place applications with Planar X topology
▲Coaxial Flexible Cables
■Low loss dielectric material for lower attenuation
■Up to 40 GHz
■Superior shielding effectiveness
■Direct solder sleeves to outer braids for superior reliability
▲RF Cable Assemblies
■Low-loss, high frequency cable assemblies available for dynamic and static applications
■Durable options for improved MTBF and reduced cost of ownership
■High power, low attenuation coaxial cable assemblies for longer assemblies in antenna use
●RF/MW Subsystems:
▲Airborne SATCOM
■Continuous connectivity at any altitude
■Market leading reliability provides lower total lifecycle cost
■Network agnostic Ku-band terminal solution saves re-provisioning time and cost
▲Positioners/Controllers
■Fixed and mobile positioning systems
■Man-portable to 7 meter installations
■Reflector and feed assemblies reaching 0.5 to 325 GHz
▲Ka-Band Antenna Systems
■Light weight fully integrated 3 LRU system
■Broad frequency coverage for c military applications
■Real time switchable dual polarization
■Operates on global Ka-band HTS satellite networks
■DO-160 qualified
▲mmW Antenna
■Full range of millimeter wave antenna products and technologies including aperture, reflector, and lens-based
■Standard models from 18 to 325 GHz
■Custom designed antenna arrays available
■Additional offerings: polarizers, orthomode transducers, monopulse comparators, and waveguide rotary joints
▲NTP Servers
■Designed for time synchronizing networks
■using IRIG-B as the time reference
■Accepts a fiber optic or wireline IRIG-B time code
■Time synchronization of SIPRNET and NIPRNET
■Remote configuration and monitoring via Ethernet and RS-232.
▲Switched Filter Banks
■Offer high selectivity in broadband systems
■Optimized integration provides low loss and fast switching speed in a rugged package
■Ideal RF conditioning solution for frequency conversion and signal intelligence applications
▲Comb Generators:
■SRD-based & NLTL-based comb generators
■Active & passive multiplier chains
■Up to full waveguide bandwidths
▲Wideband Antennas
■Used as stand-alone antennas or reflector feeds in parabolic antenna systems
■Standard models from 18 to 110 GHz
■Vast array of omnidirectional antennas
■Standard models available through 305 GHz
▲Integrated MW Assemblies
■Includes up/down converters, power amplifiers, modulators/demodulators, broadband, switched filter networks, LNA’s, oscillators, switches, synthesizers, ferrite isolator and receiver protectors
■Designed for dynamically challenging environments
■Custom form factors
▲Up/Down Converters
■Single and multi-channel
■Compact size, up to 325 GHz
■Control at high dynamic range
■Phase and gain matching
■MIC/SMT content optimized for performance & cost
■Radiometer and RADAR front ends
▲mmW Amplifiers
■Broad array of power amplifiers (AMP) up to 16-way, and low noise amplifier (LNA) solutions
■Standard models from 18 to 110 GHz
■GaN, GaAs, InP, and SiGe technologies
■Custom variations of standard millimeter-wave amplifiers, as well as multi-component assemblies and solutions
▲High Speed Vita Backplane
■Fully footprint compatible with VITA 46/48 standards
■Flexible modular design for standard 3U, 6U and custom configurations
■100 Ω impedance for differential pair configurations
■Data rate performance up to 10 Gbps
▲High Speed Copper
■Standard 100 & 150Ω quadrax & twinax contacts
■Micro twinax and quadrax connectors
■Rugged D-Sub, ARINC and MIL-DTL-38999 standard quadrax and twinax
■Data rates up to 6.25 Gbps
■Reverse gender quadrax contacts
▲Rugged 2mm Backplane
■NASA GSFC qualified
■High-temp LCP insulator meeting outgassing requirements
■Reverse gender to commercial 2mm products
■Keying feature ensures proper mating
■Modular design for 3U/6U configurations
▲PCB Interposers
■Low profile, high compliance ratio
■Compression mount termination options
■Mixed signals and functionality designed into a single connector
■Integrated alignment, latching and sealing featuresPCB Interposers
■Low profile, high compliance ratio
■Compression mount termination options
■Mixed signals and functionality designed into a single connector
■Integrated alignment, latching and sealing features
▲High Density LRM PCB
■Line removable module (LRM) connector, available in 132 through 594 positions
■Includes signal, power, fiber optic & coax options
■Conforms to MIL-DTL-55302 general requirements
■High density: 6-row chevron grid layout, 1.905 mm pitch, 0.6 mm pin dia.
▲Signal & Power PCB
■Available with hyperboloid and spring probe contact technologies
■Ranges from 17 to 490 contacts, with straight dip, right angle solder, crimp, solder cup and wire wrap termination options
■Guiding devices with or without polarization (16 keys available)
■Front release, rear removable contacts
▲Quick Release Miniature
■Lightweight, robust, quick release, miniature size
■Exceptional signal integrity
■Spring loaded contacts
■IP67 sealing, circular or rectangular options, with or without over-molding and cabling
■Designed for extreme environmental conditions
▲EMI/EMP Filter
■MIL-DTL-38999, ARINC 600 compatible
■Intermateable and interchangeable with standard non-filter connectors
■Butt-joint and expanded beam
■TVS protection meeting the requirements of RTCA D160 section 22 up to level 5
▲Fiber Optic
■Butt-joint and expanded beam
■Floating design (<-0.5dB), low loss fiber options
■MIL-DTL-38999, ARINC 600 compatible
■PC or APC ferrule end face
▲High Power Circular
■Current rating 300 A and 500 A
■High power capabilities in a small size
■Push lock to mate connector
■Rugged metal shell
■360° EMI/RFI shielding option
■RoHS Compliant
▲RF Coax/Triax
■Spring loaded for optimum contact mating force
■Low VSWR
■Size 8: 1.15:1 Typ Mated Pair, Size 12; 1.25:1
■Insertion Loss: 0.15dB to 26.5 GHz Typ (Size 8) and 0.2dB to 40 GHz Typ (Size 12)
▲Fiber Optic ARINC 801
■Compatible with multi-mode and single-mode fiber
■Standard 1.25 mm ferrule and sleeve
■Cable termination identical to LC connector process
■Standard MIL-DTL-38999 and ARINC 600 Size 16
●Fiber Optics & RF Components:
▲Coaxial Isolators
■Wide range of isolators, circulators, loads, terminations, and attenuators
■Designed to operate from 300 MHz to 26 GHz
■Unique solid connectors available including female & male orientations, and SMA, TNC & SMP styles
■Male/ female connector barrel machined to be integrated in housing
■Optimized for thermal and dynamic operational environments
▲Microstrip, Surface Mount & Stripline Isolators & Circulators
■Operating in assigned bands from 400 MHz to 31 GHz
■Used in a variety of interfaces including MIC, tabbed, and SMD interfaces
■Microstrip offers a unique blend of broad band operation, low mass and low profile
■Surface mount and stripline suitable for pick and place and reflow soldering
▲RF Components
■Innovative design and material maximize power-to-size ratio
■Low and high power designs from 0.1 to 800W
■Alumina, ALN, BeO and CVD substrates
■Wide range of resistance values
■High precision and reliabilityDiamond RF Resistives
▲Waveguides
■Isolators, circulators, combiners, couplers, loads, transitions, terminations, & multi-function assemblies
■Full waveguide band isolators and circulators WR-42-WR-05 (18-220 GHz)
■High power waveguide circulators / isolators for protecting TWTs up to 100 GHz
■Breadth of passive products operate from 1.0 GHz to 325 GHz
■High power devices are supplied as junction or differential phase shift types
■Guaranteed low and stable insertion loss under maximum power
▲Attenuators
■Product versions from DC to 50 GHz
■Excellent RF broadband performance
■50 years of proven space and military heritage
■Footprint compatibility with Thermopad®
■Surface mount, wire bond, tab, flange and coaxial configurations
▲Diamond RF Resistives
■High power-to-size ratings to 300W
■Excellent peak power performance
■Extremely low parasitic capacitance
■Super compact form factor
■Space and military qualified
▲Optical VPX Interconnects
■Blind-mate backplane interconnects for embedded computing systems
■10 Gbps and 28 Gbps optical modules in small-SWaP ruggedized packages
■Mechanical Transfer (MT) ferrule with linear array of 24 parallel multimode fibers
■Designed following VITA 66.5 standard
■Rugged solution, MIL-STD 883/202/810 qualified
▲Optical Embedded Transceivers
■12-channel TX and 12-channel RX
■Multimode 850 nm wavelength laser
■Over 100 m reach on OM3 ribbon fiber
■Standard MT parallel fiber connector
■Surface mountable or pluggable
■MIL-STD 883/202/810 qualified, radiation tested
▲RF Filters
■RF Filters, Multiplexers, Switched Filter Banks, and Integrated assemblies, from 100 KHz to 65 GHz
■Bandpass, lowpass, highpass, notch, diplexed & multiplex options
■Small footprint and light weight
■Surface mountable for pick and place applications with Planar X topology
▲Coaxial Flexible Cables
■Low loss dielectric material for lower attenuation
■Up to 40 GHz
■Superior shielding effectiveness
■Direct solder sleeves to outer braids for superior reliability
▲RF Cable Assemblies
■Low-loss, high frequency cable assemblies available for dynamic and static applications
■Durable options for improved MTBF and reduced cost of ownership
■High power, low attenuation coaxial cable assemblies for longer assemblies in antenna use
●RF/MW Subsystems:
▲Airborne SATCOM
■Continuous connectivity at any altitude
■Market leading reliability provides lower total lifecycle cost
■Network agnostic Ku-band terminal solution saves re-provisioning time and cost
▲Positioners/Controllers
■Fixed and mobile positioning systems
■Man-portable to 7 meter installations
■Reflector and feed assemblies reaching 0.5 to 325 GHz
▲Ka-Band Antenna Systems
■Light weight fully integrated 3 LRU system
■Broad frequency coverage for c military applications
■Real time switchable dual polarization
■Operates on global Ka-band HTS satellite networks
■DO-160 qualified
▲mmW Antenna
■Full range of millimeter wave antenna products and technologies including aperture, reflector, and lens-based
■Standard models from 18 to 325 GHz
■Custom designed antenna arrays available
■Additional offerings: polarizers, orthomode transducers, monopulse comparators, and waveguide rotary joints
▲NTP Servers
■Designed for time synchronizing networks
■using IRIG-B as the time reference
■Accepts a fiber optic or wireline IRIG-B time code
■Time synchronization of SIPRNET and NIPRNET
■Remote configuration and monitoring via Ethernet and RS-232.
▲Switched Filter Banks
■Offer high selectivity in broadband systems
■Optimized integration provides low loss and fast switching speed in a rugged package
■Ideal RF conditioning solution for frequency conversion and signal intelligence applications
▲Comb Generators:
■SRD-based & NLTL-based comb generators
■Active & passive multiplier chains
■Up to full waveguide bandwidths
▲Wideband Antennas
■Used as stand-alone antennas or reflector feeds in parabolic antenna systems
■Standard models from 18 to 110 GHz
■Vast array of omnidirectional antennas
■Standard models available through 305 GHz
▲Integrated MW Assemblies
■Includes up/down converters, power amplifiers, modulators/demodulators, broadband, switched filter networks, LNA’s, oscillators, switches, synthesizers, ferrite isolator and receiver protectors
■Designed for dynamically challenging environments
■Custom form factors
▲Up/Down Converters
■Single and multi-channel
■Compact size, up to 325 GHz
■Control at high dynamic range
■Phase and gain matching
■MIC/SMT content optimized for performance & cost
■Radiometer and RADAR front ends
▲mmW Amplifiers
■Broad array of power amplifiers (AMP) up to 16-way, and low noise amplifier (LNA) solutions
■Standard models from 18 to 110 GHz
■GaN, GaAs, InP, and SiGe technologies
■Custom variations of standard millimeter-wave amplifiers, as well as multi-component assemblies and solutions
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
