66737 Delock Adapter cable USB Type-A to Serial RS-232 RJ12 with ESD protection Leadshine 2 m
■This USB to serial RS-232 RJ12 adapter cable by Delock is suitable with the ProTuner software for configuration, control, monitoring etc. of the servo and stepper motors by Leadshine.
■Compatible Devices: Stepper motors: DM432C, DM442, DM556, DM856 3DM683 AM882 DM1182 DM2282 Servomotors: DCS810, DCS810S, ACS306, ACS606, ACS806
●Specification
■Connectors:1 x USB 2.0 Type-A male1 x Serial RS-232 RJ12 plug
■Chipset: FTDI FT231X
■Plug & Play
■ESD protection:
■FIFO: 512 Byte - TX
■FIFO: 512 Byte - RX
■Compatible with USB 3.0, USB 2.0, and USB 1.1 full speed 12 Mbps
■Data transfer rate up to 230.4 Kb/s
■Signals: RXD(3), GND(4), TXD(5)
■ESD protection IEC 61000-4-2
◆HCP & VCP: ±4 kV
◆Air Discharge: ±8 kV
◆Contact Discharge: ±4 kV
■Colour: black
■Cable length incl. connectors: ca. 2.0 m
■Suitable for various devices by Leadshine
USB Type-A to Serial RS-232 RJ12 Adapter cable 、 USB 2.0 Type-A Adapter cable |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
19.10.2021 |
|
|
|
|
|
141 KB |
- +1 Like
- Add to Favorites
Recommend
- Aimmet‘s HSDaimmet HSD to USB Adaptor Supports the Different Devices Connecting and Inherits the HSD Design of Error-proof Coding
- Overview and Advantages of Micro USB
- The Application of Self Recovery Fuses in Automotive USB Systems
- Kinghelm‘s Micro-B Connector KH-MICRO5P-JN Commonly Used for USB Interfaces, Including the USB 2.0 and USB 3.0 Standards
- Micro USB Connector Introduction
- FT232 USB Bridge ICs, a Powerful Chip with a Complete USB Protocol
- Dual Port USB Type-C Controller LDR6282 Designed for USB PD Docking Stations with Video Output
- Definition and Classification of USB Connectors
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.