USB5537B/USB5534B/USB5533B/USB5532B Family Silicon Errata and Data Sheet Clarification

2021-10-28
● Non-Removable Settings with Non-Sequential Port Disables can Cause System Error
● External Strapping Function Not Operational
● SPI Operation Failure if Dual-Read SPI-Flash is used at 60MHz
● Combined Mode Port Power Controller Configuration Does Not Work with BC enabled
● USB 3.0 Non-removal Bitmask Re-mapped by Physical Port Counts when Ports Disabled
● DFP's performing a Hot Reset May Not Issue a Warm Reset when Requested with SET_FEATURE(PORT_RESET)
● LeCroy TD 10.110 May Fail Hot Reset in DSPORT.Enabled_in_U1
● False RemoteWake Request Propagated on Connect when conn_RW_enable is Disabled
● UCS1002 May Turn-Off DFP Port Power when USB 2.0 Hub Transitions to Global Suspend
● UCS SMBus Communication Only Available using PRT_CTL1 and OCS1 Pins

Microchip

USB5537BUSB5534BUSB5533BUSB5532BUSB5537B FamilyUSB5534B FamilyUSB5533B FamilyUSB5532B Family

More

Part#

More

More

Errata

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

04-11-14

Revision DS80000610A

DS80000610A

487 KB

- The full preview is over. If you want to read the whole 9 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: