MCP3913 3V Six-Channel Analog Front End

2021-10-26
The MCP3913 is a 3V six-channel Analog Front End (AFE), containing six synchronous sampling Delta Sigma, Analog-to-Digital Converters (ADC), six PGAs, phase delay compensation block, low-drift internal voltage reference, Digital Offset and Gain Error Calibration registers and high-speed 20 MHz SPI-compatible serial interface.
The MCP3913 ADCs are fully configurable with features such as: 16/24-bit resolution, Oversampling Ratio (OSR) from 32 to 4096, gain from 1x to 32x, independent shutdown and Reset, dithering and auto-zeroing. The communication is largely simplified with 8-bit commands, including various continuous Read/Write modes and 16/24/32-bit data formats that can be accessed by the Direct Memory Access (DMA) of an 8, 16 or 32-bit MCU, and with the separate Data Ready pin that can directly be connected to an Interrupt Request (IRQ) input of an MCU.
The MCP3913 includes advanced security features to secure the communications and the configuration settings, such as a CRC-16 checksum on both serial data outputs and static register map configuration. It also includes a register map lock through an 8-bit secure key to stop unwanted WRITE commands from processing.
The MCP3913 is capable of interfacing with a variety of voltage and current sensors, including shunts, Current Transformers, Rogowski coils and Hall effect sensors.

Microchip

MCP3913MCP3913A1-E/SSMCP3913A1T-E/SSMCP3913A1-E/MVMCP3913A1T-E/MV

More

Part#

Six-Channel Analog Front EndAFE

More

Polyphase Energy Meters ]Energy Metering ]Power Measurement ]Automotive ]Portable Instrumentation ]Medical Monitoring ]Power Monitoring ]Audio Recognition ]Voice Recognition ]

More

Datasheet

More

More

Please see the document for details

More

More

UQFN;SSOP

English Chinese Chinese and English Japanese

January 2020

Revision C

DS20005227C

2.4 MB

- The full preview is over. If you want to read the whole 86 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: