CAP1166 6 Channel Capacitive Touch Sensor with 6 LED Drivers Data Brief

PublishTime：2021-10-22

●The CAP1166, which incorporates SMSC’s RightTouch® 1 technology, is a multiple channel Capacitive Touch sensor with multiple power LED drivers. It contains six (6) individual capacitive touch sensor inputs with programmable sensitivity for use in touch sensor applications. Each sensor input automatically recalibrates to compensate for gradual environmental changes.
The CAP1166 also contains six (6) LED drivers that offer full-on / off, variable rate blinking, dimness controls, and breathing. Each of the LED drivers may be linked to one of the sensor inputs to be actuated when a touch is detected.
As well, each LED driver may be individually controlled via a host controller.
The CAP1166 includes Multiple Pattern Touch recognition that allows the user to select a specific set of buttons to be touched simultaneously. If this pattern is detected, then a status bit is set and an interrupt generated.
Additionally, the CAP1166 includes circuitry and support for enhanced sensor proximity detection.
The CAP1166 offers multiple power states operating at low quiescent currents. In the Standby state of operation, one or more capacitive touch sensor inputs are active and all LEDs may be used. If a touch is detected, it will wake the system using the WAKE/SPI_MOSI pin.
Deep Sleep is the lowest power state available, drawing 5uA (typical) of current. In this state, no sensor inputs are active. Driving the WAKE/SPI_MOSI pin or communications will wake the device.
●Features
■Six (6) Capacitive Touch Sensor Inputs
▲Programmable sensitivity
▲Automatic recalibration
▲Individual thresholds for each button
■Proximity Detection
■Multiple Button Pattern Detection
■Calibrates for Parasitic Capacitance
■Analog Filtering for System Noise Sources
■Press and Hold feature for Volume-like Applications
■Multiple Communication Interfaces
▲SMBus / I²C compliant interface
▲SMSC BC-Link interface
▲SPI communications
▲Pin selectable communications protocol and multiple slave addresses (SMBus / I2C only)
■Low Power Operation
▲5uA quiescent current in Deep Sleep
▲50uA quiescent current in Standby (1 sensor input monitored)
▲Samples one or more channels in Standby
■Six (6) LED Driver Outputs
▲Open Drain or Push-Pull
▲Programmable blink, breathe, and dimness controls
▲Can be linked to Capacitive Touch Sensor inputs
■Dedicated Wake output flags touches in low power state
■System RESET pin
■Available in 20-pin 4mm x 4mm QFN or 24-pin SSOP RoHS compliant package

Brand of Product：	Microchip
Part#：	CAP1166 、 CAP1166-1-BP-TR 、 CAP1166-1-CZC-TR More Part#
Product Category：	Capacitive Touch Sensor More
Application：	[ Desktop ][ Notebook PCs ][ LCD Monitors ][ Consumer Electronics ][ Appliance ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：	QFN;SSOP
Language：	English Chinese Chinese and English Japanese
Date of Creation：	01-05-12
Version Number：	Revision 1.32
Data Encoding：
Data Size：	474 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 7 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits