SLG46533 GreenPAK Programmable Mixed-signal Matrix
●Logic & Mixed Signal Circuits
●Highly Versatile Macrocells
●Read Back Protection (Read Lock)
●1.8 V (±5%) to 5 V (±10%) Supply
● Operating Temperature Range: -40°C to 85°C
●RoHS Compliant / Halogen-Free
●20-pin STQFN: 2 x 3 x 0.55 mm, 0.4 mm pitch or 22-pin MSTQFN 2 x 2.2 x 0.55 mm, 0.4 mm pitch
▲Overview
●The SLG46533 provides a small, low power component for commonly used mixed-signal functions. The user creates their circuit design by programming the one time Non-Volatile Memory (NVM) to configure the inter connect logic, the IO Pins and the mac-rocells of the SLG46533. This highly versatile device allows a wide variety of mixed-signal functions to be designed within a verysmall, low power single integrated circuit. The macrocells in the device include the following
●Four Analog Comparators (ACMP)
●Two Voltage References (Vref)
●Twenty-six Combination Function Macrocells
■Three Selectable DFF/Latch or 2-bit LUTs
■Twelve Selectable DFF/Latch or 3-bit LUTs
■One Selectable Pipe Delay or 3-bit LUT
■One Selectable Programmable Pattern Generator or 2-bit LUT
■Five 8-bit delays/counters or 3-bit LUTs
■Two 16-bit delays/counters or 4-bit LUTs
■Two Deglitch Filters with Edge Detectors
●Combinatorial Logic
■One 4-bit LUT
●Serial Communications
■I2C Protocol compliant
●16x8 RAM Memory with defined NVM OTP initial state
●Pipe Delay – 16 stage/3 output (Part of Combination Function Macrocell)
●Programmable Delay
●Two Oscillators (OSC)
■Configurable 25 kHz/2 MHz
■25 MHz RC Oscillator
●Crystal Oscillator
●Power-On-Reset (POR)
●Analog Temperature Sensor
SLG46533 、 SLG46533V 、 SLG46533VTR 、 SLG46533M 、 SLG46533MTR |
|
[ Personal Computers and Servers ][ PC Peripherals ][ Consumer Electronics ][ Data Communications Equipment ][ Handheld and Portable Electronics ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
STQFN-20;MSTQFN-22;MSTQFN-22L |
|
English Chinese Chinese and English Japanese |
|
February 2, 2021 |
|
Revision 1.22 |
|
|
|
2.4 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.