D4200 Remote Stations PRODUCT DATA
■There is a complete range of remote control stations available for D4200 systems. Their DECORA® design matches other DECORA® devices, and accepts any of the DECORA® or DECORA® PLUS screwless wallplates. These stations allow remote access to many of the D4200's functions, from multiple locations. Several remote stations can be combined in one location to provide the exact control functions required. Rooms with multiple entrances may use different remote stations at each entry, providing control of the functions that are best suited to that location.
◆FEATURES
■Remote controls available in 3 different configurations.
■Up to 5 pushbuttons for full control, or simple two push button stations where only limited access to controls is desired.
■All control switches are back-lighted to indicate what has been selected.
■Excellent tactile feel, and a "click" you can feel
■Used with Leviton DECORA® PLUS plates.
■No visible fasteners.
■Most units have an infrared receiver inside, and presets can be selected from a remote hand held infrared transmitter.
■As many as 127 units can be operated a Luma-Net network
■Only four wires required, two data wires and two low voltage (12 volt DC) power wires.
■All wiring is Class 2.
■Each device is supplied with a white faceplate.
■Can slave to multiple master stations.
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021/08/27 |
|
|
|
G-8495/A11-cb |
|
553 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.