Marvell® FastLinQ® 41000 Series

PublishTime：2021-10-19

●The FastLinQ 41000 Series Adapters with Universal Remote Direct Memory Access (RDMA)—available in 10GBASE-T (RJ45), 10-Gigabit Ethernet (GbE) SFP+, and 25GbE SFP28 form factors for Dell PowerEdge® Open Compute Project (OCP) 3.0 Servers— support LAN (TCP/IP) traffic at 10/25GbE line-rate speeds. The 41000 Series provides extremely low host CPU usage by enabling full stateless offloads to meet the perfor-mance requirements of the most demanding enterprise applications.
●The FastLinQ 41000 Series leverage Marvell’s 15+ years of expertise in Ethernet, providing the highest levels of performance, efficiency, and scalability for enterprise data centers.
●For more effective use of the 10/25GbE bandwidth, the 41000 Series offers switch-inde-pendent NIC partitioning (NPAR), which enables segmentation of a single 10/25GbE port into multiple network partitions and dynamic allocation of bandwidth to each port. The segmentation allows IT organizations to optimize resources while lowering infra-structure and operational costs.
●The evolution of data centers—triggered by high-density server virtualization, soft-ware-defined networking (SDN), and multitenant cloud computing platforms—demands a high-performance 10/25GbE solution that boosts CPU efficiency and reduces capital expenditures (CAPEX) and operational expenditures (OPEX) of the migration to 10/25GbE. The FastLinQ 41000 Series Adapters are the best choice for workload-inten-sive computing environments, providing reliable, high-performance 10/25GbE connectivity solutions.
■Features:
●PCI Express® (PCIe®) Gen 3 x8 (8GT/s) support
●Full line-rate performance across single and dual ports
●Broad operating system (OS) and hypervisor support
●Network boot support
◆iSCSI remote boot (SW L2 only)
◆Preboot Execution Environment (PXE) 2.0
◆Unified Extensible Firmware Inter-face (UEFI) support
●Simplifies deployment and trouble-shooting using QConvergeConsole® (QCC) GUI, QLogic® Control Suite (QCS) CLI, QCC PowerKit, UEFI human interface infrastructure (HII), in-OS utilities, QCC vCenter GUI and ESXCLI Plug-ins, and OpenStack® integration
●Switch-independent NPAR with up to 16 partition assignments per adapter
●Marvell Data Plane Development Kit (DPDK) high-speed packet processing engine delivers up to 38 million packets per second at 64B frame sizes
●Marvell Flow Filtering is supported on Linux® using the ethtool -u/-Ucommands. See the n-tuple Flow Filtering and Steering FastLinQ 41000/45000 Series Adapters Deployment Guide for more information.
●Universal RDMA technologies—RDMA over Converged Ethernet (RoCE), RoCEv2, and Internet wide area RDMA protocol (iWARP)
●Energy Efficient Ethernet (EEE) support for reduced idle power consumption in RJ-45-based networks (10GBASE-T variants only)
●MSI and MSI-X support
●IPv4 and IPv6 stateless offloads
●PCI-SIG® single root input/output virtualization (SR-IOV) with up to 192 virtual functions
●Comprehensive stateless offloads
●Auto negotiation: 1G/10G (BASE-T) and 10G/25G (on direct attach cable (DAC) cable using 10GBASE-KR/25GBASE-CR)
●FastLinQ SmartAN for simplified connectivity with 10G SFP+/25G SFP28 interfaced switches. (SFP+ interfaces can accept DAC or optical (discrete or active optic cable (AOC)) connections).
●RX/TX multiqueue
◆VMware® NetQueue
◆Windows® Hyper-V® Virtual Machine Queue
◆Linux Multiqueue
●Tunneling offloads
◆Windows Network Virtualization using Generic Routing Encapsulation (NVGRE)
◆Linux Generic Routing Encapsulation (GRE)
◆VMware, Windows, and Linux Virtual Extensible LAN (VXLAN)
◆Linux and VMware Generic Network Virtualization Encapsulation (GENEVE)
●Receive side scaling (RSS)
●Transmit side scaling (TSS)
●Support for virtual LAN (vLAN) tagging
●Support for jumbo frames larger than 1,500 bytes (up to 9,600 bytes)
●Network teaming, failover, and load balancing
◆Switch independent NIC teaming/bonding
◆Switch dependent NIC teaming/bonding such as link aggregation control protocol (LACP) and generic trunking
●Data center bridging (DCB)
◆Data center bridging capability exchange protocol (DCBX) link layer discovery protocol (LLDP)
◆Priority-based flow control (PFC)
◆Traffic Class over VLAN’s 3-bit priority code point (PCP) field or Traffic Class over the IP header’s 3-bit differentiated services code point (DSCP) field
◆Enhanced Transmission Selection (ETS)
◆Explicit Congestion Notification (ECN or CN)
◆Data Center Quantized Congestion Notification (DCQCN)
●Non-offloaded Storage over Ethernet
◆iSCSI using OS-based software initiators

Brand of Product：	MARVELL
Part#：	41000 Series 、 41000 More Part#
Product Category：	Adapters More
Application：	More
Data Type：	Supplier and Product Introduction More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	01/21
Version Number：	Rev. 1
Data Encoding：	TD-001173
Data Size：	423 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 9 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits