AD667 Microprocessor-Compatible 12-Bit D/A Converter
●Complete 12-Bit D/A Function
◆Double-Buffered Latch
◆On Chip Output Amplifier
◆High Stability Buried Zener Reference
●Single Chip Construction
●Monotonicity Guaranteed Over Temperature
●Linearity Guaranteed Over Temperature: 1/2 LSB max
●Settling Time; 3 us max to 0.01%
●Guaranteed for Operation with ±12 V or ±15 V Supplies
●Low Power: 300 mW Including Reference
●TTL/5 V CMOS Compatible Logic Inputs
●Low Logic Input Currents
●MIL-STD-883 Compliant Versions Available
■PRODUCT DESCRIPTION：
The AD667 is a complete voltage output 12-bit digital-to-analog converter including a high stability buried Zener voltage reference and double-buffered input latch on a single chip. The converter uses 12 precision high speed bipolar current steering switches and a laser trimmed thin-film resistor network to pro-vide fast settling time and high accuracy.
Microprocessor compatibility is achieved by the on-chip double-buffered latch. The design of the input latch allows direct inter-face to 4-, 8-, 12-, or 16-bit buses. The 12 bits of data from thefirst rank of latches can then be transferred to the second rank,avoiding generation of spurious analog output values. The latch responds to strobe pulses as short as 100 ns, allowing use withthe fastest available microprocessors.
The functional completeness and high performance in the AD667 results from a combination of advanced switch design,high speed bipolar manufacturing process, and the proven laserwafer-trimming (LWT) technology. The AD667 is trimmed atthe wafer level and is specified to I 1/4 I SB maximum linearity error (K, B grades) at +25°C and 1/2 LsB over the full operating temperature range.
The subsurface (buried) Zener diode on the chip provides a low noise voltage reference which has long term stability and temperature drift characteristics comparable to the best discrete reference diodes. The laser trimming process which provides the excellent linearity, is also used to trim the absolute value of the reference as well as its temperature coefficient. The AD667 is thus well suited for wide temperature range performance with ±1/2 LSB maximum linearity error and guaranteed monotonicity over the full temperature range. Typical full-scale gain Tc is5 ppm/C.
The AD667 is available in five performance grades. TheAD667J and K are specified for use over the 0C to +70C temperature range and are available in a 28-pin molded plastic DIP(N) or PLCC (P) package. The AD667S grade is specified for the -55°C to +125°C range and is available in the ceramic DIP(D) or LCC (E) package. The AD667A and B are specified for use over the -25C to +85°C temperature range and are avail-able in a 28-pin hermetically sealed ceramic DIP (D) package.
|
AD667 、 AD667JN 、 AD667JP 、 AD667KN 、 AD667AD 、 AD667BD 、 AD667SD 、 AD667SE 、 AD667/883B |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
DIP |
|
|
English Chinese Chinese and English Japanese |
|
|
2020/03/24 |
|
|
REV.A |
|
|
C842b-22-8/87 |
|
|
753 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
