Signal Analyzer MS2830A Microwave Product Brochure
2021-10-14
●The Signal Analyzer MS2830A-044/045 includes a spectrum analyzer function with upper frequency limits of 26.5 GHz and 43 GHz.Combining it with the High Performance Waveguide Mixer or the External Mixer MA2740C/MA2750C series supports measurements up to 325 GHz. It supports measurements of Tx characteristics, including adjacent channel leakage power, spectrum mask, and frequency counter, as well as spurious measurements requiring a wide dynamic range.
●Installing the bandwidth analysis option up to 125 MHz adds signal analyzer functions for checking phenomena that are hard to check using a spectrum analyzer, such as frequency vs. time, phase vs. time, spectrogram, and CCDF. In addition, optional measurement software supports modulation analysis. Moreover, installing a preselector bypass option enables use of the signal analyzer and modulation analysis functions up to 26.5 GHz/43 GHz (MS2830A-044/045). Finally, it can be customized to support a range of application-specific measurements.
◆Installing a microwave-band preamp supports measurement of weaker signals.
◆Using the 1st local signal output as an external mixer supports measurement of high-frequency signals up to 325 GHz.
◆Using the 1st IF signal output as a down converter supports analysis in combination with external equipment
■Key Features:
●Basic Performance/Functions
◆Frequency Range
▲MS2830A-044: 9 kHz to 26.5 GHz
▲MS2830A-045: 9 kHz to 43 GHz
◆Measures up to 325 GHz using High Performance Waveguide Mixer and External Mixer
▲Frequency Range:
▼26.5 GHz to 325 GHz (External Mixer)
▼50 GHz to 90 GHz (High Performance Waveguide Mixer)
▲Built-in connector to connect High Performance Waveguide Mixer and External Mixer (MS2830A-044/045)
▼Connector: SMA-J, 50Ω
▼Local Signal Output: 5 GHz to 10 GHz
▼IF Signal Frequency: 1.875 GHz
◆Excellent Dynamic Range:
▲159 dB (at 25 GHz)
▼TOI: ≥+13 dBm
▼DANL: –146 dBm/Hz
▲157 dB (at 40 GHz)
▼TOI: ≥+13 dBm (nom.)
▼DANL: –144 dBm/Hz
◆Preamp up to 43 GHz
▲→ MS2830A-068/168: Microwave Preamplifier
▲DANL: –156 dBm/Hz (at 25 GHz)
▲DANL: –150 dBm/Hz (at 40 GHz)
◆Total Level Accuracy:
▲±0.5 dB (300 kHz ≤ f < 4 GHz)
▲±3.0 dB (13.8 GHz < f ≤ 40 GHz)
◆Used as Wideband Down Converter
▲Built-in IF Output Function (MS2830A-044/045)
▼Connector: SMA-J, 50Ω
▼IF Output Frequency: 1.875 GHz
▼IF Output Bandwidth: 1 GHz (3 dB Bandwidth, nom.)
▼Gain: –10 dB (nom.)
●Improved Level Linearity
◆Reference Oscillator
▲Pre-installed Reference Oscillator
▼Aging Rate: ±1 × 10–7/year, ±1 × 10-–8/day
▼Start-up Characteristics: ±5 × 10-–8 (5 minutes after power-on)
▲Rubidium Reference Oscillator (MS2830A-001/037)
▼Aging Rate: ±1 × 10-–10/month
▼Start-up Characteristics:±1 × 10-–9 (MS2830A-001: 7 minutes after power-on, MS2830A-037: 15 minutes after power-on)
◆Versatile Built-in Functions
▲Channel Power
▲Occupied Bandwidth
▲Adjacent Channel Leakage Power
▲Spectrum Emission Mask
▲Spurious Emission
▲Burst Average Power
▲Frequency Counter
▲AM Depth
▲FM Deviation
▲Multi-marker & Marker List
▲Highest 10 Markers- Limit Line
▲2-tone 3rd-order Intermodulation Distortion
▲ Annotation Display (On/Off)
▲Power Meter
▲ Phase Noise
▲Noise Figure
◆Low-power Consumption
▲MS2830A-044/045: 190 VA (nom.)
●Signal Analyzer Functions
◆Analysis Bandwidth
▲MS2830A-006: 10 MHz max.(20 MHz max. sampling rate = 50 ns resolution, ADC resolution 16 bits)
▲MS2830A-005, MS2830A-009: 31.25 MHz max.(50 MHz max. sampling rate = 20 ns resolution, ADC resolution 16 bits)
▲MS2830A-077: 62.5 MHz max.(100 MHz max. sampling rate = 10 ns resolution, ADC resolution 14 bits)
▲MS2830A-078: 125 MHz max.(200 MHz max. sampling rate = 5 ns resolution, ADC resolution 14 bits)
◆Capture Function
▲Saves analysis Span × Time signal to internal memory and writes to hard disk. Up to 100 Msamples per measurement saved to internal memory.
▼Example: Span 1 MHz: Max. capture time 50 s;Span 10 MHz: Max. capture time 5 s;Span 100 MHz: Max. capture time 0.5 s
◆Replay Function
▲Reads saved data and replays using signal analyzer function.
▼Example:
1. Data sharing between R&D and manufacturing
2. Later laboratory bench-top analysis of on-site signals
◆Measurement with Sub-trace Display
▲Split screen displaying both main and sub-traces at same time to check errors
▼Main: Spectrum, Frequency vs. Time, Power vs. Time, Phase vs. Time, CCDF/APD, Spectrogram
▼Sub: Power vs. Time, Spectrogram
◆Supports 125 MHz Wideband Measurements up to 43 GHz
▲→ MS2830A-067: Microwave Preselector Bypass
▲→ MS2830A-078: Analysis Bandwidth Extension to 125 MHz
▲Bypassing preselector improves RF frequency characteristics and in-band frequency characteristics. Supports modulation analysis and signal analyzer measurements for signals up to 43 GHz.
●BER Measurement Function (MS2830A-026)
◆This option measures BER using Data/Clock/Enable demodulated at the DUT.
▲Input Bit Rate: 100 bps to 10 Mbps
▲Input Level: TTL Leve
●Installing the bandwidth analysis option up to 125 MHz adds signal analyzer functions for checking phenomena that are hard to check using a spectrum analyzer, such as frequency vs. time, phase vs. time, spectrogram, and CCDF. In addition, optional measurement software supports modulation analysis. Moreover, installing a preselector bypass option enables use of the signal analyzer and modulation analysis functions up to 26.5 GHz/43 GHz (MS2830A-044/045). Finally, it can be customized to support a range of application-specific measurements.
◆Installing a microwave-band preamp supports measurement of weaker signals.
◆Using the 1st local signal output as an external mixer supports measurement of high-frequency signals up to 325 GHz.
◆Using the 1st IF signal output as a down converter supports analysis in combination with external equipment
■Key Features:
●Basic Performance/Functions
◆Frequency Range
▲MS2830A-044: 9 kHz to 26.5 GHz
▲MS2830A-045: 9 kHz to 43 GHz
◆Measures up to 325 GHz using High Performance Waveguide Mixer and External Mixer
▲Frequency Range:
▼26.5 GHz to 325 GHz (External Mixer)
▼50 GHz to 90 GHz (High Performance Waveguide Mixer)
▲Built-in connector to connect High Performance Waveguide Mixer and External Mixer (MS2830A-044/045)
▼Connector: SMA-J, 50Ω
▼Local Signal Output: 5 GHz to 10 GHz
▼IF Signal Frequency: 1.875 GHz
◆Excellent Dynamic Range:
▲159 dB (at 25 GHz)
▼TOI: ≥+13 dBm
▼DANL: –146 dBm/Hz
▲157 dB (at 40 GHz)
▼TOI: ≥+13 dBm (nom.)
▼DANL: –144 dBm/Hz
◆Preamp up to 43 GHz
▲→ MS2830A-068/168: Microwave Preamplifier
▲DANL: –156 dBm/Hz (at 25 GHz)
▲DANL: –150 dBm/Hz (at 40 GHz)
◆Total Level Accuracy:
▲±0.5 dB (300 kHz ≤ f < 4 GHz)
▲±3.0 dB (13.8 GHz < f ≤ 40 GHz)
◆Used as Wideband Down Converter
▲Built-in IF Output Function (MS2830A-044/045)
▼Connector: SMA-J, 50Ω
▼IF Output Frequency: 1.875 GHz
▼IF Output Bandwidth: 1 GHz (3 dB Bandwidth, nom.)
▼Gain: –10 dB (nom.)
●Improved Level Linearity
◆Reference Oscillator
▲Pre-installed Reference Oscillator
▼Aging Rate: ±1 × 10–7/year, ±1 × 10-–8/day
▼Start-up Characteristics: ±5 × 10-–8 (5 minutes after power-on)
▲Rubidium Reference Oscillator (MS2830A-001/037)
▼Aging Rate: ±1 × 10-–10/month
▼Start-up Characteristics:±1 × 10-–9 (MS2830A-001: 7 minutes after power-on, MS2830A-037: 15 minutes after power-on)
◆Versatile Built-in Functions
▲Channel Power
▲Occupied Bandwidth
▲Adjacent Channel Leakage Power
▲Spectrum Emission Mask
▲Spurious Emission
▲Burst Average Power
▲Frequency Counter
▲AM Depth
▲FM Deviation
▲Multi-marker & Marker List
▲Highest 10 Markers- Limit Line
▲2-tone 3rd-order Intermodulation Distortion
▲ Annotation Display (On/Off)
▲Power Meter
▲ Phase Noise
▲Noise Figure
◆Low-power Consumption
▲MS2830A-044/045: 190 VA (nom.)
●Signal Analyzer Functions
◆Analysis Bandwidth
▲MS2830A-006: 10 MHz max.(20 MHz max. sampling rate = 50 ns resolution, ADC resolution 16 bits)
▲MS2830A-005, MS2830A-009: 31.25 MHz max.(50 MHz max. sampling rate = 20 ns resolution, ADC resolution 16 bits)
▲MS2830A-077: 62.5 MHz max.(100 MHz max. sampling rate = 10 ns resolution, ADC resolution 14 bits)
▲MS2830A-078: 125 MHz max.(200 MHz max. sampling rate = 5 ns resolution, ADC resolution 14 bits)
◆Capture Function
▲Saves analysis Span × Time signal to internal memory and writes to hard disk. Up to 100 Msamples per measurement saved to internal memory.
▼Example: Span 1 MHz: Max. capture time 50 s;Span 10 MHz: Max. capture time 5 s;Span 100 MHz: Max. capture time 0.5 s
◆Replay Function
▲Reads saved data and replays using signal analyzer function.
▼Example:
1. Data sharing between R&D and manufacturing
2. Later laboratory bench-top analysis of on-site signals
◆Measurement with Sub-trace Display
▲Split screen displaying both main and sub-traces at same time to check errors
▼Main: Spectrum, Frequency vs. Time, Power vs. Time, Phase vs. Time, CCDF/APD, Spectrogram
▼Sub: Power vs. Time, Spectrogram
◆Supports 125 MHz Wideband Measurements up to 43 GHz
▲→ MS2830A-067: Microwave Preselector Bypass
▲→ MS2830A-078: Analysis Bandwidth Extension to 125 MHz
▲Bypassing preselector improves RF frequency characteristics and in-band frequency characteristics. Supports modulation analysis and signal analyzer measurements for signals up to 43 GHz.
●BER Measurement Function (MS2830A-026)
◆This option measures BER using Data/Clock/Enable demodulated at the DUT.
▲Input Bit Rate: 100 bps to 10 Mbps
▲Input Level: TTL Leve
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.