STM32G0C1E-EV - Evaluation board with STM32G0C1VE MCU
▲Mother board
■ STM32G0C1VET6 Arm® Cortex®-M0+ core-based microcontroller with512 Kbytes of Flash memory and 144 Kbytes of RAM in LQFP100 package
■ MCU voltage choice fixed at 3.3 V or adjustable from 1.65 V to 3.5 V
■ I2C compatible serial interface
■ RTC with backup battery
■ 8-Gbyte or more SPI interface microSD™ card
■ Potentiometer
■ 4 color user LEDs and one LED as MCU low-power alarm
■ Reset, Tamper, and User buttons
■ 4-direction joystick with selection button
■ Board connectors:
◆ 5 V power jack
◆ RS-232 and RS485 communications
◆ CAN FD
◆ Stereo audio jack including analog microphone input
◆ microSD™ card
◆ Extension I2C connector
◆ Motor-control connector
◆ Daughterboard connectors for legacy peripheral daughterboard or USB -C® and Power Delivery daughterboard
◆ Extension connectors for daughterboard or wire-wrap board
■ Flexible power-supply options:
◆ 5 V power jack
◆ ST-LINK/V2-1 USB connector
◆ Daughterboard
■ On-board ST-LINK/V2-1 debugger/programmer with USB re-enumeration capability: Virtual COM port and debug port
■ Comprehensive free software libraries and examples available with the STM32CubeG0 MCU Package
■ Support of a wide choice of Integrated Development Environments (IDEs)including IAR Embedded Workbench®, MDK-ARM, and STM32CubeIDE
▲Legacy peripheral daughterboard
■ IrDA transceiver
■ IR LED and IR receiver
■ Light-dependent resistor (LDR)
■ Temperature Sensor
■ Board connectors:
◆ Two HDMI connectors with DDC and CEC
◆Smartcard slot
▲USB -C® and Power Delivery daughterboard
■ Muliplexor for first generation USB 3.1 Type-B receptacle / DisplayPort™ input and USB Type-C® port 1 output
■ Multiplexor for USB Type-C® port 2 input and DisplayPort™ output / USB 2.0Type-A receptacle
■ VCONN on USB Type-C® port 1
■ USB PD on USB Type-C® port 1
■ Board connectors:
◆USB Type-C® port 1 DRP (dual-role port) and USB 2.0 FS data
◆USB Type-C® port 2 sink
◆DisplayPort™ input
◆DisplayPort™ output
◆ First generation USB 3.1 Type-B receptacle, not installed by default
◆ USB 2.0 Type-A receptacle, not installed by default
◆ 19 V power jack for USB PD
●Description
■The STM32G0C1E-EV Evaluation board is a high-end development platform for the STM32G0C1VET6 microcontroller operating at up to 64 MHz frequency with internal512-Kbyte Flash memory, 144-Kbyte RAM, USB 2.0 FS device and host, two CAN FDs, USB Type-C®, and Power Delivery controller interfaces (UCPD) compliant with USB Type-C® r1.2 and USB PD specification r3.0, three I2Cs, three SPIs, six USARTs, two low-power UARTs, one 12-bit ADC, two 12-bit DACs, three general-purpose comparators, seven general-purpose timers, two low-power timers, HDMI CEC, and SWD debugging support.
■The full range of hardware features on the STM32G0C1E-EV Evaluation board includes the mother board, the legacy peripheral daughterboard, and the USB -C®and Power Delivery daughterboard, which help to develop applications, and evaluate all peripherals, such as USB Type-C® connector with USB PD, motor control connector, CAN FD, USB 2.0 FS, RS-232, RS-485, audio DAC, microphone ADC,TFT LCD, IrDA, IR LED, IR receiver, LDR, microSD™ card, CEC on two HDM Iconnectors, Smartcard slot, RF EEPROM, and temperature sensor.
■The board integrates an ST-LINK/V2-1 as an embedded in-circuit debugger and programmer for the STM32 MCU.
■The daughterboard and extension connectors provide an easy way to connect a daughterboard or wrapping board for the user's specific application.
■The USB-C® and Power Delivery daughterboard features two independent USB -C® ports controlled by STM32G0. USB -C® port 1 is dual role power (DRP) and can provide up to 45 W of power. USB -C® port 2 is sink only. Both support the USB PD protocol and the alternate mode functionality.
■Application firmware examples are provided to evaluate USB-C® technology through various use cases.
STM32G0C1E-EV 、 STM32G0C1VE 、 STM32G0C1VET6 、 STM32G0 、 STM32CubeG0 |
|
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
LQFP100 |
|
English Chinese Chinese and English Japanese |
|
12-Oct-2020 |
|
Rev 1 |
|
DB4305 |
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
- Rosenberger and STMicroelectronics Cooperate to Develop a Unique High-Speed Contactless Connector Based on 60GHz Wireless Technology
- STMicroelectronics and Sierra Wireless Collaborate to Simplify and Accelerate Connected IoT Solutions Deployment
- MTA Announces Partnership with STMicroelectronics for Smart Tractor
- Eclipse Global Connectivity, Smiths Interconnect and ST Engineering IDirect Collaborate to Deliver a New Airborne ISR SATCOM Capability
- ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
- G-NiceRF’s New LoRa Spread Spectrum Modulation SOC Wireless Module LoRa-STM32WLE5 with Built-in ARM and Industrial Grade Crystal Oscillator
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
- Rosenberger‘s Innovative Contactless Connector RoProxCon can Bridge Construction-related Air Gaps and Has A High Interference Immunity
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.