STUSB1602 USB Type-C™ controller with TX/RX line driver and BMC
■Type-C™ attach and cable orientation detection
■Power role support: source/sink/DRP
■Configurable start-up profiles
■Integrated power switch for VCONN supply:
◆ programmable current limit up to 600 mA
◆ overcurrent, overvoltage, and thermal protection
◆ under-voltage lockout
■I²C interface and interrupt
■Integrated VBUS voltage monitoring
■Integrated VBUS and VCONN discharge path
■Integrated BMC transceiver
■VBUS switch gate driver
■Low power standby mode
■Dead battery mode support
■Short-to-VBUS protection on CC pins (22 V) and VBUS pins (28 V)
■Accessory mode support
■Dual power supply (VSYS and/or VDD):
◆VSYS = [3.0 V; 5.5 V]
◆VDD = [4.1 V; 22 V]
■Compliant with:
◆ USB Type-C™ rev 1.2
◆ USB PD rev 2.0 (Certif. test ID 1010032)
■Compatible with:
◆ USB PD rev 3.0
●Applications
■Smart plugs, wall adapters, and chargers
■Power hubs and docking stations
■Smartphones and tablets
■Gaming and PNDs
■Displays
■Cameras, camcorders, and MP3 players
■Any Type-C source or sink device
●Description
■The STUSB1602 is a generic IC designed in a 20V technology. It addresses USB Type-C™ port management both on the host and/or device side, and is suited for a broad range of applications.
■The STUSB1602 can handle all functions from Type-C attach detection, plug orientation detection, host to device connection, VCONN support, and VBUS configuration.
■It also provides a USB PD TX/RX line driver and BMC (biphase mark coding) transceiver which allows USB PD negotiation and alternative mode through an external MCU.
■Additionally, the STUSB1602 provides support for dead battery operation.
●Functional description
■The STUSB1602 is a USB Type-C controller IC. It is designed to interface with the Type-C receptacle both on host and/or device sides. It is used to establish and manage the source-to-sink connection between two USB Type-C host and device ports.
▲The major role of the STUSB1602 is to:
◆Detect the connection between two USB Type-C ports (attach detection)
◆Establish a valid source-to-sink connection
◆ Determine the attached device mode: source, sink or accessory
◆ Resolve cable orientation and twist connections to establish USB data routing (mux control).
◆ Configure and monitor the VBUS powerpath
◆Manage VBUS power capability: USB default, Type-C medium or Type-C high current mode.
◆ Configure VCONN when required8. Support USB PD negotiation
▲The STUSB1602 also provides:
◆.Low power standby mode
◆ Dead battery mode
◆. I²C interface and interrupt
◆ Start-up configuration customization: static through NVM and/or dynamic through I²C
◆ High voltage protection6. Accessory mode detection
[ Smart plugs ][ wall adapters ][ chargers ][ Power hubs ][ docking stations ][ Smartphones ][ tablets ][ Gaming ][ PNDs ][ Displays ][ Cameras ][ camcorders ][ MP3 players ][ Type-C source or sink device ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN24 |
|
English Chinese Chinese and English Japanese |
|
19-Nov-2020 |
|
Rev 4 |
|
D028319 |
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
- Rosenberger and STMicroelectronics Cooperate to Develop a Unique High-Speed Contactless Connector Based on 60GHz Wireless Technology
- MTA Announces Partnership with STMicroelectronics for Smart Tractor
- STMicroelectronics and Sierra Wireless Collaborate to Simplify and Accelerate Connected IoT Solutions Deployment
- Eclipse Global Connectivity, Smiths Interconnect and ST Engineering IDirect Collaborate to Deliver a New Airborne ISR SATCOM Capability
- ROHM Group Company SiCrystal and STMicroelectronics Expand Silicon Carbide Wafer Supply Agreement
- SKYLAB Launched A Bluetooth/BLE5.0 Positioning System Development Demo Kit
- Bluetooth gateway and Bluetooth Beacon for Factory Personnel Bluetooth Positioning Solution, Accuracy can Reach 2~3m
- China Requires Automobile Manufacturers to Increase the Proportion of Domestic Chip Procurement
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.