AS5047U 14-Bit On-Axis Magnetic Rotary Position Sensor with Up to 14-Bit Binary Incremental Pulse Count Datasheet
■The AS5047U is a high-resolution rotary position sensor for fast absolute angle measurement over a full 360-degree range. This new position sensor is equipped with a revolutionary integrated dynamic angle error compensation (DAEC™) with almost 0 latency at higher rotational speed. For increased signal quality at lower rotational speed, the dynamic filter system (DFS™) reduces transition noise.
■The robust design of the device suppresses the influence of any homogenous external stray magnetic field. A standard 4-wire SPI serial interface with a CRC protection allows a host microcontroller to read 14-bit absolute angle position data from the AS5047U and to program non-volatile settings without a dedicated programmer.
■Incremental movements are indicated on a set of ABI signals with a maximum resolution of 16989 steps / 4096 pulses per revolution.
■Brushless DC (BLDC) motors are controlled through a standard UVW commutation interface with a programmable number of pole pairs from 1 to 7. The absolute angle position is also provided as PWM-encoded output signal.
■AS5047U are single die sensors and are available in a TSSOP14 Package.
●Benefits
■Easy to use – saving costs on DSP
■Higher durability and lower system costs (no shield needed)
■Versatile choice of the interface
●Features
■DAEC ™ Dynamic angle error compensation
■DFS ™ Dynamic filter system
■Magnetic stray field immunity
■Independent output interfaces: SPI, ABI, UVW, PWM
high-resolution rotary position sensor 、 On-Axis Magnetic Rotary Position Sensor |
|
[ industrial applications ][ Factory automation ][ Building automation ][ Robotics ][ PMSM ][ permanent magnet synchronous motor ][ Stepper motor closed loop ][ Optical encoder replacement ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TSSOP-14 |
|
English Chinese Chinese and English Japanese |
|
2020-Dec-16 |
|
v1-01 |
|
|
|
686 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.