SPC563Mxx, SPC564Axx microcontroller family evaluation board
■SPC560xx modular evaluation system
■On/off power switch with LED indicators
■Board power supply: 12 VDC external supply voltage
■Onboard STMicroelectronics L9758 voltage regulator with three simultaneous output at 1.2 V, 3.3 V and 5 V
■Possibility to configure onboard peripherals to operate at 5 V or 3.3 V logic levels, depending on target
■Two CAN channels with jumper enable
▲One CAN channel with High-Speed transceiver and DB9 male connector
▲One CAN channel with Low-Speed Fault Tolerant and High-Speed transceiver (selectable with jumpers) and DB9 male connector
■Up to two LIN channels with jumper enable
▲One channel with transceiver and pin header connector populated
▲One channel with footprints only
■One SCI channel with jumper enables, transceiver and DB9 female connector
■Two FlexRay channels with jumper enables
▲One channel with transceiver and DB9 male connector
▲One channel with footprint only
■Four user push buttons with jumper enable and polarity selection
■Four user LED’s with jumper enables
■One potentiometer for analog voltage input
■Pin array for accessing all I/O signals
■Expansion connectors for accessing all I/O signals
■Prototyping area with 0.1” spacing and SOIC footprint
■Specifications:
▲Board size 110 mm x 75 mm (SPC563Mxx)
▲Board size 120 mm x 95 mm (SPC564Axx)
▲12 VDC Center Positive power supply with 2.5/5.5 mm barrel connectory
■Standard connectors to SPC56XXMB
●Description
■The SPC564AADPT324S, SPC563MADPT144S and SPC563M64A176S areevaluation systems supporting the STMicroelectronics SPC56xx family of automotive microprocessors.
■The complete system consists of an SPC56XXMB motherboard and a mini modulewhich plugs directly into the motherboard. Different mini modules are available forevaluating the whole family of devices in all supported packages.
■The evaluation system (motherboard and daughter card) allows full access to theCPU, all the CPU's I/O signals, and the motherboard peripherals (such as CAN, SCIand LIN). The mini modules itself can be used as a standalone unit when access tothe I/O pins or peripherals is not needed.
■The MCU is not included, it must be purchased separately. Please contact your salesrepresentative for more details.
|
SPC564AADPT324S 、 SPC563MADPT144S 、 SPC563M64A176S 、 SPC563Mxx 、 SPC564Axx 、 SPC563M60L5 、 SPC563M60L7 、 SPC563M64L7 、 SPC564A70L7 、 SPC564A80L7 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
16-Dec-2019 |
|
|
Rev 3 |
|
|
DB1752 |
|
|
249 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
