RADIO-1200-5G Wireless broadband radio - 5.8 GHz
The WAVES RADIO-1200-5G, part of the ALERiTY integrated Mass Notification platform, is a high-speed broadband radio that provides wireless connections between Ethernet devices and/or Ethernet wired networks (LANs). The RADIO-1200-5G can be used for communication to end nodes (i.e. HPSA-8100-R and ACU-8421) as well as a bridge. The Eaton approved radio can be added to any IPC2 node within the WAVES Mass Notification System for wireless communications. The RADIO-1200-5G must be connected to an IPC2 for power and supervision and provide DC-DC PoE injector.
The WAVES wireless radio provides broadband connectivity, operating in the 5.8 GHz frequency band.It combines the benefits of reliable distance communications with data throughput required by the ALERiTY platform. The RADIO-1200-5G provides a mesh network for increased reliability and uptime. It supports point-to-point, point-to-multipoint, relay, repeater (2 radios), and hybrid topologies. In addition, the RADIO-1200-5G features superior diagnostic tools, including antenna alignment, length strength, white list and black list filtering, and programmable meshing.
●Features & benefits:
■Wireless Ethernet Radio provides wired to wireless bridge to the WAVES over IP Mass Notification Systems
■Uses reliable 5.8 GHz spectrum for transmission
■Provides infrastructure placement flexibility; Extending reach up to 6 miles line of sight (Distance depends on site specifics. Site survey should be conducted by Eaton Application Specialists to determine actual distance.)
■Security: White list and black list filtering
■Radio power input: 24 Volts DC Power over Ethernet (provided)
■Support transparent bridge mode and mesh network
■Remote system configuration and superior diagnostic tools, including antenna alignment, length strength, and programmable meshing
■Can be configured as point-to-point, point-to-multipoint, relay, repeater and hybrid topologies
■Built-in antenna eliminates the cost of special antenna cables
■Mbps throughput options: 15, 30 and 100 Mbps models available
■Up to 3 single radio (same RF channel) relays per frequency
■Up to 9 total relays/repeaters (single/dual radios) from the WAVES server to the last end node
■Maximum of 15 radios can be connected directly to any one node or access point
■Each radio can support up to 15 wired IPC nodes
|
RADIO-1200-5G 、 RADIO-1200-5G-15 、 RADIO-1200-5G-30 、 RADIO-1200-5G-100 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
April 2019 |
|
|
|
|
|
TD450149EN |
|
|
127 KB |
- +1 Like
- Add to Favorites
Recommend
- What Is the Difference Between Microwave Signal Generator and Radio Frequency Signal Generator?
- What Is the Difference Between Vector Signal Source and Radio Frequency Signal Source?
- Keysight Gains First GCF Validation of 5G Radio Resource Management Test Cases in mmWave Spectrum
- Keysight Solutions Selected by Synergy to Advance 5G Virtualized Open Radio Access Network Technology Development
- Industry‘s First Complete 5G Radio Synchronization Solution: Renesas Expanded Communication Timing Portfolio
- Maxwell‘s FM radio planar antenna using FPC flexible medium supports customization, and the frequency covers 87-110MHz
- Keysight Enables Altice Labs to Verify Performance of O-RAN Radio Units
- Keysight Enables Microamp Solutions to Accelerate Development of mmWave Radio Units for Private 5G Networks
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
