D5048 I.S. SIL3 Loop-Powered Digital Output Driver

2021-09-22
The Loop-Powered Digital Output Driver D5048 is a module suitable for applications requiring SIL 3 level in safety related systems for high risk industries. It can drive solenoid valves, visual or audible alarms to alert a plant operator, or other process control devices in Hazardous Area from control signals located in Safe Area. They can also be used as switchable supplies to power measuring or process control equipments. Line and load open/short circuit detection is provided, when the load is on: the fault in the field is directly mirrored to the PLC DO and it is also reported by opening the fault output. If required, the override input can switch off the output regardless of the input status. For each channel three basic output circuits are selectable, with different safety parameters, to interface the majority of devices on the market.
●FEATURES:
■SIL 3/SC 3
■Output to Zone O/Div. 1
■Installation in Zone 2/Div. 2
■Loop powered for NE loads
■Line & Load short/open circuit detection
■Output short circuit proof
■In-field programmability by DIP Switch
■Three port isolation, Input/Output/Fault

GM INTERNATIONAL

D5048D5048S

More

Part#

Loop-Powered Digital Output Driver

More

More

Datasheet

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/07/24

DTS0286-13

142 KB

- The full preview is over,the data is 2 pages -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: