MAX66120 ISO 15693-Compliant 1Kb Memory Fob
■The MAX66120 combines 1024 bits of user EEPROM, a 64-bit unique identifier (UID), and a 13.56MHz ISO 15693 RF interface in a plastic key fob. The memory is organized as 16 blocks of 8 bytes plus two more blocks for data and control registers. Each block has a user-readable write-cycle counter. Four adjacent user EEPROM blocks form a memory page (pages 0 to 3). Memory protection features are write protection and EPROM emulation, which the user can set for each individual memory page. The MAX66120 supports all ISO 15693-defined data rates, modulation indices, subcarrier modes, the selected state, application family identifier (AFI), data storage format identifier (DSFID), and the Option_flag bit for read operations. Memory write access is accomplished through standard ISO 15693 memory and control function commands.
●Features
■Fully Compliant with ISO 15693 and ISO 18000-3 Mode 1 Standard
■13.56MHz ±7kHz Carrier Frequency
■1024-Bit User EEPROM with Block Lock Feature, Write-Cycle Counter, and Optional EPROM-Emulation Mode
■64-Bit UID
■Read and Write (64-Bit Block)
■Supports AFI and DSFID Function
■10ms Programming Time
■To Fob: 10% or 100% ASK Modulation Using 1/4 (26kbps) or 1/256 (1.6kbps) Pulse-Position Coding
■From Fob: Load Modulation Using Manchester Coding with 423kHz and 484kHz Subcarrier in Low (6.6kbps) or High (26kbps) Data-Rate Mode
■200,000 Write/Erase Cycles (Minimum)
■40-Year Data Retention (Minimum)
■Compatible with Existing 1Kb ISO 15693 Products on the Market
■Supports the Option_Flag for Read Operations
■Powered Entirely Through the RF Field
■Operating Temperature: -25°C to +50°C
[ Driver Identification ][ Fleet Application ][ Access Control ][ Asset Tracking ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
11/10 |
|
Rev 0 |
|
19-5623 |
|
372 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.