QMFLN Water, Vibration and Oil Resistant LED Work Lights user manual
◆External power line - Dura & Flex-FVU(0.5sq) x 2C 450mm
◆When wiring the product, please ensure that the terminals are not exposed to coolant in order to prevent the bare wire from being contaminated.
◆Please connect the 4 pins located in M12 connector cable to the M12 socket of the product.
■Bracket Adjustment
●In case angle adjustment is needed after installation, please loosen the fixing bolt of two brackets completely and remove them.
●Securing the bracket bushings using spanner, loosen the bracket fixing nuts slightly and adjust the angle as desired.
●Once the angle is adjusted as desired, please secure the bracket fixing bolt aligning with guide rail and tighten the bracket fixing nut.
■Installation
◆First, machine taps or holes on the mounting surface.
◆The mounting hole of this product is 7mm in diameter(long hole).
◆When machining taps, fasten the bolt through the mounting hole of the product.
◆When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
◆Install flat washer and spring washer when fastening bolt and nut.
■Installation Environment and Protection Rating
▲This product is designed for use with protection rating of IP67/IP69K.
▲If the product is installed in locations that subject it to excessive dust or water other than the designated IP protection rating indicated(IP67/IP69K), it may cause malfunction or damage to the product.
QMFLN 、 QMFLN-200-24-TLC 、 QMFLN-200 、 QMFLN-300 、 QMFLN-400 、 QMFLN-500 、 QMFLN-600 |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021/08/14 |
|
|
|
EN - QMFLN-200 - 2106A |
|
998 KB |
- +1 Like
- Add to Favorites
Recommend
- [应用]25A/40V德欧泰克SBX2540-3G太阳能旁路二极管用于光伏电池板,泄漏电流低仅200μA
- [产品]采用DO-201AE封装的TVS二极管1.5KE6.8~1.5KE550CA,峰值脉冲功率为1500W
- “GoGreen, the Future is Getting Brighter“: Diotec‘s SM4000 Rectifier Diode Supports LED Lights for Urban Development
- 12V AC to DC Converter for LED: Efficiently Powering Your LED Lights
- Diotec‘s 3rd Generation Schottky Diode SK54-3G Offers Energy Savings and Temperature Reduction in LED Lightings
- 12V AC to DC Converter for LED – Efficiently Powering LED Lights with Smooth Conversion
- LED Power Series: Illuminating the Future with Energy-efficient Lighting
- Efficient AC to DC Converter for LED Lighting: A 12V Solution
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.