SSEL Explosion Proof LED Perimeter Light user manual

2021-09-14
■Terminal Box Wiring Instructions
●Terminal block is located inside of the product. Unscrew the 4 bolts located in the upper body to get rid of the upper lighting element of the unit.
●Please apply fork (U-type) or ring (O-type) locking spade terminal at naked tip of the wire for secure connection.
●Please wire the power line to terminal
●For AC type products, wire regardless of polarity.
●For DC type products, wire terminal of black line to (-) polarity.
●External power line - UL1015 AWG18(0.75sq) x 2C 400m
■Installation
▲First, machine taps or holes on the mounting surface .
▲The mounting hole of this product is 8.5mm in diameter.
▲When machining taps, fasten the bolt through the mounting hole of the product.
▲When machining holes, insert the bolt through the hole of the product, and tighten the nut from the opposite side of the mounting surface.
■Grounding Instructions
◆Please use an M4 bolt at the location marked in the diagram above to ground the product.
◆When connecting the grounding cable, please use a ring terminal.
◆Please use a grounding cable with a diameter greater than 4mm.
■Installation Environment and Protection Rating
▲This product is designed to be explosion proof.
▲Please make sure to use the product in an environment that meets the specified explosion proof rating and regulations.

QLIGHT

SSELSSEL-220-R

More

Part#

Explosion Proof LED Perimeter Light

More

More

User's Guide

More

More

Please see the document for details

More

More

English Chinese Chinese and English Japanese

2021/08/14

EN - SSEL - 2106A

1.1 MB

- The full preview is over. If you want to read the whole 4 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: