NG4access ODF Platform Value-Added Module (VAM) All Front Access
▲Install the module from the rear of the universal chassis (“left” module on left side “right”module on right side). Use the following procedure, referring to the illustration below.
◆1. Pull out the access tray handle.
◆2. Snap the module down in locations 1, 2, and 3, as shown in Figure1, then squeeze the module and access tray crossbar at location 4 and 5, as shown, until the module snaps in.
◆3. Slide in the access tray handle to close the access tray.
◆4. Connect cables to the module front ports and route the cables on the front of the frame per instructions on laminated cards hanging on front of the frame (TECP-90-705).
■Installing a Double or Triple Height VAM
▲Install the module from the rear of the universal chassis (“left” module on left side, “right” module on right side). Use the following procedure, referring to the illustration below.
◆1. Identify the two or three trays where the double or triple high VAM is to be installed.
◆2. Remove the top one or two trays
◆3. Install clips between access tray doors referring to Figure2.
◆4. Snap the module down in locations 1, 2, and 3, as shown in Figure3, then squeeze the module and access tray crossbar at location 4 and 5, as shown, until the module snaps in.
◆5. Slide in the access tray handle to close the access tray.
◆6. Connect cables to the module front ports and route the cables on the front of the frame per instructions on laminated cards hanging on front of the frame (TECP-90-705).
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
December 2019 |
|
|
Rev D |
|
|
TECP-90-720 |
|
|
1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
