MTE Interconnection System
2021-09-13
●The AMPMODU MTE Interconnection System offers both wire-to-board and wire-to-wire connectors using .025 [0.64] sq. post technology.
●The AMPMODU MTE Interconnection System consists of single-row housings with contacts preloaded on .100 [2.54] centers. Housings are furnished with contacts partially inserted, leaving the termination areas exposed. Final contact insertion can be accomplished automatically with Tyco Electronics application equipment, and manually when terminated with the Tyco Electronics pistol grip hand tool.
●The heart of the system is the insulation displacement contact design, featured in both pin and receptacle contacts. The receptacle contact, available in either standard or high-pressure, features dual cantilever beams in an enclosed“box.” The post stop helps prevent a mating post from disturbing the wire termination and also limits the mating depth of a long post to protect a wrap-type termination at the base of the post. The forward contact stop helps prevent contact over insertion prior to termination. All contacts are furnished on carrier strips which are interlocked for stability and positive location during termination.
●Single-row housings are available in sizes 2 through 25 positions. Included are three styles of receptacle housings—plain, polarized/latching and ribbed and two styles of pin housings, shrouded with polarizing/latching feature and ribbed.
●Product Facts:
■Receptacle assemblies mate with .025 [0.64] sq. posts; mating post length is .200[5.08] min., .250 [6.35] max
■Proven AMPMODU receptacle contact design; dual cantilever beams, built-in anti-overstress, completely enclosed “box” design, standard or high-pressure
■Insulation displacement technology
■Two contact sizes for terminating 30-22 AWG [0.05-0.3 mm²] wire range; .054 [1.37] max. insulation diameter with an insulation wall thickness of .015 [0.38] max.
■Choice of gold duplex or tinplated contacts
■Interchangeable crimp snap-in pin and receptacle contacts available
■Housing sizes 2 through 25 positions, single-row .100 [2.54] centers
■Plain housings are end-to-end and/or back-to-back stackable for open pin field applications
■Optional header with “swaged tail” feature helps prevent movement prior to flow soldering
■Integral latch provides positive retention between header and receptacle housing
■Coupling shrouds permit ganging of smaller connectors with guide ribs to form larger single- or double-row latching connectors
■Mass terminating tooling provides lowest applied cost for most production needs
■SMT and SMT compatible, high-temp headers available
■Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476
■Certified by Canadian Standards Association, File No. LR7189
●The AMPMODU MTE Interconnection System consists of single-row housings with contacts preloaded on .100 [2.54] centers. Housings are furnished with contacts partially inserted, leaving the termination areas exposed. Final contact insertion can be accomplished automatically with Tyco Electronics application equipment, and manually when terminated with the Tyco Electronics pistol grip hand tool.
●The heart of the system is the insulation displacement contact design, featured in both pin and receptacle contacts. The receptacle contact, available in either standard or high-pressure, features dual cantilever beams in an enclosed“box.” The post stop helps prevent a mating post from disturbing the wire termination and also limits the mating depth of a long post to protect a wrap-type termination at the base of the post. The forward contact stop helps prevent contact over insertion prior to termination. All contacts are furnished on carrier strips which are interlocked for stability and positive location during termination.
●Single-row housings are available in sizes 2 through 25 positions. Included are three styles of receptacle housings—plain, polarized/latching and ribbed and two styles of pin housings, shrouded with polarizing/latching feature and ribbed.
●Product Facts:
■Receptacle assemblies mate with .025 [0.64] sq. posts; mating post length is .200[5.08] min., .250 [6.35] max
■Proven AMPMODU receptacle contact design; dual cantilever beams, built-in anti-overstress, completely enclosed “box” design, standard or high-pressure
■Insulation displacement technology
■Two contact sizes for terminating 30-22 AWG [0.05-0.3 mm²] wire range; .054 [1.37] max. insulation diameter with an insulation wall thickness of .015 [0.38] max.
■Choice of gold duplex or tinplated contacts
■Interchangeable crimp snap-in pin and receptacle contacts available
■Housing sizes 2 through 25 positions, single-row .100 [2.54] centers
■Plain housings are end-to-end and/or back-to-back stackable for open pin field applications
■Optional header with “swaged tail” feature helps prevent movement prior to flow soldering
■Integral latch provides positive retention between header and receptacle housing
■Coupling shrouds permit ganging of smaller connectors with guide ribs to form larger single- or double-row latching connectors
■Mass terminating tooling provides lowest applied cost for most production needs
■SMT and SMT compatible, high-temp headers available
■Recognized under the Component Program of Underwriters Laboratories Inc., File No. E28476
■Certified by Canadian Standards Association, File No. LR7189
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
