SIL 2 Multifunction Temperature Converter DIN-Rail and Termination Board Models D6072S, D6072D

PublishTime：2021-08-31

The single and dual channel Temperature Signal Converter D6072S and D6072D accepts a low level dc signal from millivolt, thermocouple or resistance/RTD or transmitting potentiometer sensor and converts, with isolation, the signal to drive a load, suitable for applications requiring SIL 2 (according to IEC 61508:2010) in safety related systems for high risk industries. Output signal can be direct or reverse. Modbus RTU RS-485 output is available on Bus connector.
Cold junction compensation can be programmed as:
● Automatic: provided by an internal temperature sensor;
● Fixed: to a user-customizable temperature value;
● External: making use of an external RTD;
● Remote: (only D6072D) connecting compensation RTD to one of the two channels.
For D6072D module: duplicator function provides two independent outputs from one single input. Output function can be configured as: average, subtractor, low/high or redundancy selector. Modules are provided with alarm function, which is available via solid state contact output, Termination Board and Power Bus. Mounting on standard DIN-Rail, with or without Power Bus, or on customized Termination Boards, in Safe Area / Non Hazardous Location or in Zone 2 / Class I, Division 2.
●Front Panel and Features:
■SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof =10/20 years (≤10% / >10 % of total SIF), for analog current source/sink output.
■SIL 2 according to IEC 61508:2010 (Route 2H) with Tproof = 9/20 years (≤10% / >10 % of total SIF), for alarm output.
■SC 3: Systematic Capability SIL 3.
■Installation in Zone 2 / Division 2 (pending).
■mV, thermocouple, 2 or 3 or 4 wire resistance/RTD or transmitting potentiometer Input Signal.
■2-wire RTD line resistance compensation.
■Internal Reference Junction Compensation.
■Fastest integration time: 50 ms.
■Fully customizable Output range from 0 to 24 mA Output Signal linear or reverse (typical 0/4-20 mA).
■Output duplication possible for D6072D.
■Modbus RTU RS-485 Output.
■Independent multiple Fault detection.
■Programmable alarm available on solid state contact output or Termination Board connector.
■High Accuracy, μP controlled A/D converter.
■Three port isolation, Input/Output/Supply.
■EMC Compatibility to EN61000-6-2, EN61000-6-4, EN61326-1, EN61326-3-1 for safety system.
■Fully programmable operating parameters.
■ATEX, lECEx, UL & C-UL, TUV Certifications.
■TUV Functional Safety Certification.
■High Density, two channels per unit.
■Simplified installation using standard DIN-Rail and plug-in terminal blocks, with or without Power Bus, or customized Termination Boards.
■Data logging and monitoring via software.

Brand of Product：	GM INTERNATIONAL
Part#：	D6072S 、 D6072D 、 D6072 More Part#
Product Category：	Multifunction Temperature Converter More
Application：	More
Data Type：	User's Guide More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	2021/07/24
Version Number：
Data Encoding：	ISM0216-9
Data Size：	593 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 9 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits