SCT52240 Up to 24V Supply, 4-A Dual Channel High Speed Low Side Driver
■The SCT52240 is a wide supply, dual channel, high speed, low side gate drivers for both power MOSFET and IGBT. Each channel can source and sink 4A peak current along with rail-to-rail output capability. The 24V power supply rail enhances the driver output ringing endurance during the power device transition.
■The minimum 13ns input to output propagation delay enables the SCT52240 suitable for high frequency power converter application.
■The SCT52240 features wide input hysteresis that is compatible for TTL low voltage logic. The SCT52240 has the capability to handle negative input down to -5V, which increases the input noise immunity.
■The SCT52240 has very low quiescent current that reduces the stand-by loss in the power converter. The SCT52240 each channel driver adopts non-overlap driver design to avoid the shoot-through of output stage. The two channels INA and INB have critical propagation delay matching and artificial dead time implemented in output stage, which enable stackable output available when the system needs higher driving capability.
■The SCT52240 features 170°C thermal shut down. The SCT52240 is available in SOP-8 package.
●FEATURES:
■Wide Supply Voltage Range: 4.5V - 24V
■4A Peak Source Current and 4A Peak Sink Current
■Stackable Output for Higher Driving Capability
■Negative Input Voltage Capability: Down to -5V
■TTL Compatible Input Logic Threshold
■Propagation Delay: 13ns
■Typical Rising and Falling Times: 8ns
■Typical Delay Matching: 1ns
■Low Quiescent Current: 55uA
■Output Low When Input Floating
■Independent Enable Logic for Each Channel
■Thermal Shutdown Protection: 170°C
■Available in SOP-8 Package
[ IGBT/MOSFET Gate Driver ][ Variable Frequency-Drive (VFD) ][ Switching Power Supply ][ Motor Control ][ Solar Power Inverter ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOP-8 |
|
English Chinese Chinese and English Japanese |
|
2018 |
|
Rev 1.0 |
|
|
|
2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.