ZRC500 PRECISION 5.0 VOLT LOW KNEE CURRENT VOLTAGE REFERENCE
■The ZRC500 uses a bandgap circuit design to achieve a precision micropower voltage reference of 5.0 volts. The device is available in small outline surface mount packages, ideal for applications where space saving is important, as well as packages for through hole requirements.
■The ZRC500 design provides a stable voltage without an external capacitor and is stable with capacitive loads. The ZRC500 is recommended for operation between 25μA and 5mA and so is ideally suited to low power and battery powered applications.
■Excellent performance is maintained to an absolute maximum of 25mA, however the rugged design and 20 volt processing allows the reference to withstand transient effects and currents up to 200mA. Superior switching capability allows the device to reach stable operating conditions in only a few microseconds.
●Features:
■Small outline SOT23 packages
■No stabilizing capacitor required
■Low knee current, 19μA typical
■Typical Tc 30ppm/°C
■Typical slope resistance 0.4Ω
■±2 and ±1% tolerance
■Industrial temperature range
■Operating current 25μA to 5mA
■Transient response, stable in less than 10μs
■Green molding compound (No Br, Sb)
[ Battery powered ][ portable equipment ][ Instrumentation ][ Test equipment ][ Metering and measurement systems ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SOT23 |
|
English Chinese Chinese and English Japanese |
|
March 2012 |
|
Rev. 5 - 2 |
|
DS32173 |
|
94 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.