Fast Counter Module for Saia PCD2 and Saia PCD3
●The module is suitable for counting revolutions, distances, volumes, etc. and for measuring by counting the pulses. It has two inputs, A and B, and in count modes × 1, × 2 or × 4 recognizes the direction in which incremental shaft encoder’s turn. Input A and B are suitable for connection of encoders used to automatic up/down count. The counter is loaded with a start value. The counter flag can be used to select counting direction (up or down). A software enable serves to start/stop the counter. The trigger signal can be used to record and read an intermediate value. With a Preset signal a count value can be cited and be loaded on any event into the counter. At the end of a count, the counter’s directly controlled output (CCO) can be used, for example, to trigger precise external switch operations or to release an interrupt. The CCO output is set/reset via the CCO flag.
■Features：
●2 (H112) or 4 (H114) counter module
●1 Counter Controlled Output (CCO) per counter
●2 inputs A and B per counter
●1 configurable input C per counter
●Counting range 0...16 777 215 (24bit)
●Selectable digital filter for all inputs (10 kHz...150 kHz)
|
PCD2.H112 、 PCD2.H114 、 PCD3.H112 、 PCD3.H114 、 4 405 5048 0 |
|
|
|
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
12. 2016 |
|
|
rev.ENG03 |
|
|
PP26-507 |
|
|
298 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
