R&S®DDF260 DIGITAL DIRECTION FINDER
2021-08-25
The R&S®DDF260 digital direction finder is ideal for high-performance ITU-compliant spectrum monitoring, signal analysis and multichannel digital data streaming from 8 kHz to 40 GHz in combination with highly accurate angle of arrival (AOA) direction finding from 300 kHz to 8.2 GHz. Thanks to its exceptional RF performance, the R&S®DDF260 provides cutting-edge signal detection and measurement capabilities even in high-density spectrum environments.
The R&S®DDF260 digital direction finder combines a high-performance monitoring receiver with accurate angle of ar-rival (AOA) direction finding. With up to 80 MHz real-time bandwidth for spectrum monitoring, the R&S®DDF260 is designed for detection, analysis and digital data stream-ing of signals over a wide frequency range from 8 kHz to 40 GHz. Thanks to its high dynamic range and its spec-trum scan speed of up to 110 GHz/s, even weak and low probability of intercept (LPI) signals close to strong trans-mitters can be reliably detected and measured.
In addition to its wide selection of signal measurement functions, the R&S®DDF260 provides a powerful feature set for detection and analysis of unwanted emissions as well as for multichannel processing, classification, demod-ulation and continuous I/Q streaming of unknown signals of interest. All measurements can be recorded for later documentation and further offline analysis. Recorded in-formation ranges from simple spectral data and demodu-lated audio content to wideband I/Q snapshots with full 80 MHz real-time bandwidth.
Equipped with Rohde & Schwarz single-channel direction finding (DF) antennas, the R&S®DDF260 performs highly accurate AOA direction finding from 300 kHz to 8.2 GHz.
The R&S®DDF260 digital direction finder combines a high-performance monitoring receiver with accurate angle of ar-rival (AOA) direction finding. With up to 80 MHz real-time bandwidth for spectrum monitoring, the R&S®DDF260 is designed for detection, analysis and digital data stream-ing of signals over a wide frequency range from 8 kHz to 40 GHz. Thanks to its high dynamic range and its spec-trum scan speed of up to 110 GHz/s, even weak and low probability of intercept (LPI) signals close to strong trans-mitters can be reliably detected and measured.
In addition to its wide selection of signal measurement functions, the R&S®DDF260 provides a powerful feature set for detection and analysis of unwanted emissions as well as for multichannel processing, classification, demod-ulation and continuous I/Q streaming of unknown signals of interest. All measurements can be recorded for later documentation and further offline analysis. Recorded in-formation ranges from simple spectral data and demodu-lated audio content to wideband I/Q snapshots with full 80 MHz real-time bandwidth.
Equipped with Rohde & Schwarz single-channel direction finding (DF) antennas, the R&S®DDF260 performs highly accurate AOA direction finding from 300 kHz to 8.2 GHz.
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
