HiD2082 Temperature Converter
■This isolated barrier is used for intrinsic safety applications.
This device accepts thermocouples (TC), millivolts,potentiometers, or resistance temperature detectors (RTD) from a hazardous area and converts them to an isolated, linearized analog output in the safe area.
The outputs can be selected as a current source, current sink, or voltage source with DIP switches on the side panel.
The device can also be configured as a signal splitter.
Line fault detection of the field circuit is indicated by a red LED and an output on the fault bus. The fault conditions are monitored via a Fault Indication Board.
The device is easily configured by the use of the PACTware configuration software.
This device mounts on a HiD Termination Board.
●2-channel isolated barrier
●24 V DC supply (bus powered)
●Thermocouple, RTD or potentiometer input
●Usable as signal splitter (1 input and 2 outputs)
●Linearized output 4 mA ... 20 mA, sink/source or 1 V ... 5 V
●Sensor breakage detection
●Configurable by PACTware
●Line fault detection (LFD)
●Up to SIL 2 acc. to IEC 61508/IEC 61511
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020-11-26 |
|
|
|
|
|
298204 |
|
|
1.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
