AP5100 1.2A Step-Down Converter with 1.4MHz Switching Frequency
■The AP5100 is a current mode step-down converter with a built-in power MOSFET to enable smallest solution size power conversion.
■With the low series resistance power switch it enables a constant output current of up to 1.2A over a wide input supply range. The load and line regulation has excellent response time.
■The AP5100 is self protected, through a cycle-by-cycle current limiting algorithm and an on chip thermal protection.
■The AP5100 will provide the voltage conversion with a low count of widely available standard external components.
■The AP5100 is available in SOT26 package.
●The Diodes Advantage
■The AP5100 provides a small cost effective solution size, with its integrated low R-DSON power switch and its 1.4MHz switching frequency.
▲Small industrial standard SOT26 package
◆Reduces board space requirements
▲1.4MHz fixed switching frequency
◆Prevents noise issues on PCB board and allows the use of reduced size inductor component
▲0.1uA Shutdown Mode
◆Reduces the power drain when system blocks are not required in standby situations
▲Cycle by cycle overvoltage protection and Thermal Shutdown
◆Improve robustness of circuit and prevents pre-mature failure
|
|
|
|
Supplier and Product Introduction |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
SOT26 |
|
|
English Chinese Chinese and English Japanese |
|
|
March 2010 |
|
|
|
|
|
|
|
|
297 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
