C1206X104J3HACAUTO Surface Mount Multilayer Ceramic Chip Capacitors (SMD MLCCs)

PublishTime：2021-08-10

KEMET's Flexible Termination (FT-CAP) Multilayer Ceramic Capacitor in Ultra-Stable X8R dielectric incorporates a unique, flexible termination system that is integrated with KEMET's standard termination materials. A conductive silver epoxy is utilized between the base metal and nickel barrier layers of KEMET's standard termination system in order to establish pliability, while maintaining terminal strength, solderability and electrical performance. This technology was developed in order to address the primary failure mode of MLCCs– flex cracks, which are typically the result of excessive tensile and shear stresses produced during board flexure and thermal cycling. Flexible termination technology inhibits the transfer of board stress to the rigid ceramic body, therefore mitigating flex cracks which can result in low IR or short circuit failures.
Although this technology does not eliminate the potential for mechanical damage that may propagate during extreme environmental and handling conditions, it does provide superior flex performance over standard termination systems. FT-CAP complements KEMET's Open Mode, Floating Electrode (FE-CAP), Floating Electrode with Flexible Termination (FF-CAP), and KEMET Power Solutions (KPS) product lines by providing a complete portfolio of flex mitigation solutions. Combined with the stability of KEMET's Ultra-Stable high temperature dielectric technology, these flex-robust devices are RoHS Compliant, offer up to 5 mm of flex-bend capability and feature a 150°C maximum operating temperature. Ultra-Stable X8R dielectric offers the same temperature capability as conventional X8R, but without the capacitance loss due to applied DC voltage. These devices exhibit no change in capacitance with respect to voltage and boast a minimal change in capacitance with reference to ambient temperature. They are also suitable replacements for higher capacitance and larger footprint devices that fail to offer capacitance stability. Capacitance change with respect to temperature is limited to ±15% from −55°C to +150°C.
In addition to Commercial Grade, Automotive Grade devices are available which meet the demanding Automotive Electronics Council's AEC-Q200 qualification requirements.
●Benefits：
■−55°C to +150°C operating temperature range
■Superior flex performance (up to 5 mm)
■Lead (Pb)-free, RoHS and REACH compliant
■EIA 0603, 0805, 1206, 1210, and 1812 case sizes
■DC voltage ratings of 10 V, 16 V, 25 V, 50 V and 100 V
■Capacitance offerings ranging from 0.5 pF to 0.22 μF
■Available capacitance tolerances of ±0.10 pf, ±0.25 pf, ±0.5 pf, ±1%, ±2%, ±5%, ±10%, and ±20%
■Extremely low ESR and ESL
■High thermal stability
■High ripple current capability
■No capacitance change with respect to applied rated DC voltage
■Non-polar device, minimizing installation concerns
■Commercial and Automotive (AEC–Q200) grades available
■100% pure matte tin-plated termination finish allowing for excellent solderability
■SnPb plated termination finish option available upon request (5% Pb minimum)

Brand of Product：	KEMET
Part#：	C1206X104J3HACAUTO 、 C0603C 、 C0805C 、 C1206C 、 C1210C 、 C1812C More Part#
Product Category：	Surface Mount Multilayer Ceramic Chip Capacitors More
Application：	[ decoupling ][ bypass ][ filtering ][ transient voltage suppression in critical ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	10/28/2020
Version Number：
Data Encoding：
Data Size：	1.4 MB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 20 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits