Z+ Series Programmable DC Power Supplies User Manual
■Z+ Series power supplies are wide output range, high performance switching power supplies. The Z+ Series is power factor corrected and operates from worldwide AC voltage range continuously. Output voltage and current are continuously displayed and LED indicators show the complete operating status of the power supply. The Front Panel controls allow the user to set the output parameters, the protection levels (Over-Voltage protection, Under-Voltage protection and Foldback) and preview the settings. The rear panel includes the necessary connectors to control and monitor the power supply operation by remote analog signals or by the built-in serial communication USB and RS232/485. LAN, IEEE and Isolated-Analog programming/monitoring are optional.
●Features and Options
■Constant Voltage / Constant Current with automatic crossover.
■Active Power Factor correction.
■Universal Input Voltage 85-265Vac, continuous operation.
■Embedded Microprocessor Controller.
■Built in USB & RS232/485 Interface.
■Voltage & Current high resolution adjustment by digital Encoders.
■High resolution 16 bit ADCs & DACs.
■Software Calibration (no internal trimmers / potentiometers).
■Last Setting Memory.
■Independent Remote ON/OFF (Opto-Isolated) and Remote Enable/Disable.
■Parallel operation (Master/Slave) with Active current sharing.
■Remote sensing to compensate for voltage drop of power leads.
■External Analog Programming and Monitoring (0-5V or 0-10V, user selectable).
■Cooling fan speed control for low noise and extended fan life.
■Optional LAN interface (SCPI compatible).
■Optional IEEE interface (SCPI compatible).
■Optional Isolated Analog programming/monitoring (0-5V or 0-10V, user selectable and 4-20mA).
Z160-1.3 、 Z320-0.65 、 Z650-0.32 、 Z160-2.6 、 Z320-1.3 、 Z650-0.64 、 Z160-4 、 Z320-2 、 Z650-1 、 Z160-5 、 Z320-2.5 、 Z650-1.25 、 Z375-2.2 、 Z+ Series 、 Z+ 、 Z+200 Series 、 Z+200 、 Z+400 Series 、 Z+400 、 Z+600 Series 、 Z+600 、 Z+800 Series 、 Z+800 、 Z200W 、 Z400W 、 Z600W 、 Z800W |
|
|
|
User's Guide |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
2021/06/03 |
|
|
|
|
|
6.1 MB |
- +1 Like
- Add to Favorites
Recommend
- TDK Shakes Up Robotics Market with Next-generation SmartRobotics™ Platform, TDK RoboKit1
- TDK Redefines True Wireless Stereo Applications With Vibesense360™ TWS Solution Suite
- TDK Provides MEMS Microphone Solutions for Expanding the Possibilities of Interactive Robots
- TDK Sensor Fusions Support the Realization of Automated Driving Beyond Level 2
- TDK Announces Availability of SmartBug™ 2.0 – An All-in-one Smarter Multi-sensor Wireless Module with ICM-45686-S BalancedGyro™ IMU Platform
- TDK Launches Three New SmartSound™ MEMS Microphones Compatible with Sn/Pb and Pb-free Solder Processes
- TDK Launches SmartEdgeML™ to Run Ultra-Low Power Machine Learning Models on a 6-Axis IMU
- TDK Worldwide Availability of The Industry’s First 7-Axis Motion and Pressure Sensor ICM-2078 Targeting The Consumer Electronic, Drone, and IOT Markets
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.