Mighty Gecko EFR32MG12 Errata
This document contains information on the errata of EFR32MG12. The latest available revision of this device is revision C.
For errata on older revisions, please refer to the errata history section for the device. The revision information is typically specified inor near the trace code on the device. Refer to the package marking information in the data sheet for more information.
Detailed Errata Descriptions:
●ADC_E213 – ADC KEEPINSLOWACC Mode
●CUR_E203 – Occasional Extra EM0/1 Current
●DBG_E204 – Debug Recovery with JTAG Does Not Work
●DCDC_E204 – Potential Brownout when Enabling the DCDC from Off to Low Power Mode
●EMU_E212 – Delay Required Between Successive Voltage Scaling Commands
●EMU_E214 – Device Erase Cannot Occur if Voltage Scaling Level is Too Low
●RMU_E202 – External Debug Access Not Available After Watchdog or Lockup Full Reset
●RTCC_E203 – Potential Stability Issue with RTCC Registers
●RTCC_E204 – Disabling the RTCC Backup RAM may Consume Extra Current
●RTCC_E205 – Wrap Event Can Be Missed
●USART_E201 — USART DMA Transactions Fail with Slow Peripheral Clocks
●VDAC_E201 — VDAC Output Drives All APORT Buses Simultaneously
●VDAC_E202 — PRS Outputs Not Generated when Interrupt Flag is Set
|
|
|
|
|
|
|
Errata |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
May 26th, 2017 |
|
|
Rev. 0.41 |
|
|
|
|
|
764 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
