RELIABILITY REPORT FOR MAX15090EWI+T/ MAX15090AEWI+T
●The MAX15090EWI+T/ MAX15090AEWI+Tsuccessfully metthe quality and reliability standards required of all Maxim Integrated products. In addition, Maxim Integrated's continuous reliability monitoring program ensures that all outgoing product will continue to meet Maxim Integrated's quality and reliability standards.
■Device Description
●The MAX15090/MAX15090A ICs are integrated solutions for hot-swap applications requiring the safe insertion and removal of circuit line cards from a live backplane. The devices integrate a hot-swap controller, 6mω power MOSFET, and an electronic circuit-breaker protection in a single package.
●The devices integrate an accurate current-sense circuitry and provide 220FA/A of proportional output current. The devices are designed for protection of 2.7V to 18V supply voltages. These devices implement a foldback current limit during startup to control inrush current lowering di/dt and keep the MOSFET operating under safe operating area (SOA) conditions. After the startup cycle is complete, on-chip comparators provide variable Speed/BiLevelK protection against short-circuit and overcurrent faults, and immunity against system noise and load transients. The load is disconnected in the event of a fault condition. The devices are factory calibrated to deliver accurate over current protection with Q10% accuracy. During a fault condition, the MAX15090 latches off, while the MAX15090A enters autoretry mode. The devices feature an IN to OUT short-circuit detection before startup. The devices provide a power-MOSFET GATE pin to program the slew rate during startup by adding an external capacitor. The devices have overvoltage/ undervoltage input pins that can detect an overvoltage/ undervoltage fault and disconnect the IN from the OUT. Additional features include internal overtemperature protection, power-good output, and fault-indicator output. The MAX15090/MAX15090A are available in a 28-bump,2.07mm x 3.53mm, power wafer-level package (WLP) and are rated over the -40°C to +85°C extended temperature range
|
2.7V to 18V, 12A, Hot-Swap Solution with Current Report Output |
|
|
|
|
|
Test Report |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
WLP |
|
|
English Chinese Chinese and English Japanese |
|
|
October 3, 2015 |
|
|
|
|
|
|
|
|
183 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
