MAX20069B Automotive I²C-Controlled 4-Channel 150mA Backlight Driver and 4-Output TFT-LCD Bias
The source-driver power supplies consist of a synchronous boost converter and an inverting buck-boost converter that can generate voltages up to +15V and down to -7V. The positive source driver can deliver up to 120mA, while the negative source driver is capable of 100mA. The positive source-driver supply regulation voltage (V-POS) is set by connecting an external resistor-divider on FBP or through I²C. The negative source-driver supply voltage (V-NEG) is always tightly regulated to -V-POS (down to a minimum of -7V). The source-driver supplies operate from an input voltage between 2.8V and 5.5V.
The gate-driver power supplies consist of regulated charge pumps that generate up to +28V and -21.5V and can deliver up to 3mA each.
The IC features a quad-string LED driver that operates from a separate input voltage (VBATT) and can power up to four strings of LEDs with 150mA (max) of current per string. The IC features logic-controlled pulse-width-modulation (PWM) dimming, with minimum pulse widths as low as 500ns with the option of phase shifting the LED strings with respect to each other. When phase shifting is enabled, each string is turned on at a different time, reducing the input and output ripple as well as audible noise. With phase shifting disabled, the current sinks turn on simultaneously and parallel connection of current sinks is possible.
The startup and shutdown sequences for all power do-mains are controlled using one of the seven preset modes, which are selectable through a resistor on the SEQ pin or through the I²C interface.
The MAX20069B is available in a 40-pin (6mm x 6mm) TQFN package with an exposed pad, and operates over the -40°C to +105°C ambient temperature range.
■Benefits and Features:
●4-Output TFT-LCD Bias Power
◆2.8V to 5.5V Input for the TFT-LCD Section
◆Integrated 440kHz or 2.2MHz Boost and BuckBoost Converters
◆Positive and Negative 3mA Gate Voltage Regulators with Adjustable Output Voltage
◆Flexible Resistor-Programmable Sequencing through the SEQ Pin
◆Undervoltage Detection on All Outputs
◆Low-Quiescent-Current Standby Mode
●4-Channel LED Backlight Driver
◆Up to 150mA Current per Channel
◆4.5V to 42V Input Voltage Range
◆Integrated Boost/SEPIC Controller (440kHz or 2.2MHz)
◆Dimming Ratio 10,000:1 at 200Hz
◆Adaptive Voltage Optimization to Reduce Power Dissipation in the LED Current Sinks
◆Open-String, Shorted-LED, and Short-to-GND Diagnostics
●Low EMI
◆Phase-Shift Dimming of LED Strings
◆Spread Spectrum on LED Driver and TFT
◆Selectable Switching Frequency with Fine-Tuning via I²C
●I²C Interface for Control and Diagnostics
◆Fault Indication through the FLTB pin and I²C
●Overload and Thermal Protection
●-40°C to +105°C Ambient Temperature Operation
●40-Pin (6mm x 6mm) TQFN Package with Exposed Pad
|
MAX20069B 、 MAX20069BGTL/V+ 、 MAX20069BGTL/VY+ 、 MAX20069BGTLA/V+ 、 MAX20069BGTLA/VY+ |
|
|
[ Automotive Dashboards ][ Automotive Central Information Displays ][ Automotive Head Up Displays ][ Automotive Navigation Systems ] |
|
|
Datasheet |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
TQFN;TQFN-EP |
|
|
English Chinese Chinese and English Japanese |
|
|
9/20 |
|
|
Rev 0 |
|
|
19-10899 |
|
|
940 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
