UTRS3088 CMOS IC

2021-07-15
●FAIL-SAFE, 1.0MBPS,RS-485/RS-422 TRANSCEIVERS WITH ±15KV ESD-PROTECTED
●DESCRIPTION:
■The UTC UTRS3088 is a half-duplex transceiver designed for RS-485 data bus network, which contains one transmitter and one receiver.The UTC UTRS3088 features a fail-safe receiver, which guarantees the receiver to output high when the receiver inputs are open, short or idle.
■The UTC UTRS3088 also features a hot-swap glitch free protection circuits which guarantee outputs of both the transmitter and the receiver in a high impedance state during the power up period.So that the large short current from power to ground will be disable by glitch free function, which will save the power and enhance the efficiency of the power up.
■The UTC UTRS3088 is optimized for signal rates up to 1.0Mbps with differential voltage of 2.3V.The UTC UTRS3088 also has the thermal shutdown function when the temperature is over 150 °C and the protection of the current limitation in the transmitter to protect the itself from the damage by the system-fault conditions during normal operation.
●FEATURES:
■ Meet the requirements of the EIA/TIA-485 standards.
■ 5.0V single power supply.
■ 1μA low-current shutdown mode.
■ HBM ±15kV ESD protection for Transmitter Output
■ True fail-safe receiver while maintaining EIA/TIA-485 compatibility.
■ Hot-Swap glitch free protection on control inputs.
■ Up to 256 transceivers on the bus.
■ Maximum baud rate up to 1.0Mbps.
■ Transmitter short circuit current limit.
■ Thermal shutdown for overload protection.

UTC

UTRS3088UTRS3088L-S08-RUTRS3088G-S08-R

More

Part#

CMOS ICTRANSCEIVERShalf-duplex transceiver

More

More

Datasheet

More

More

Please see the document for details

More

More

SOP-8

English Chinese Chinese and English Japanese

2021

QW-R113-012.E

231 KB

- The full preview is over. If you want to read the whole 8 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: