SKW92B Datasheet IoT WLAN Module
● The SKW92B module integrates a 1T1R 802.11n Wi-Fi radio, a 580MHz MIPS CPU,1-port fast Ethernet PHY, USB2.0 host, I2C/PCM and multiples low IOs.
● The module provides two operation modes–IoT gateway mode and IoT device mode. In IoT gateway mode, the high performance USB2.0 allows SKW92B to add 3G/LTE modem support or add a H. 264 ISP for wireless IP camera. For the IoT device mode,the module supports eMMC, SD-XC and USB2.0. In IoT device mode, it further supports PWM, SPI slave, 3rd UART and more GPIOs. For IoT gateway,it can connect to touch panel and BLE, Zigbee/Z-wave and sub-1GRF for smart home control.
■ Features
● Compliant to IEEE 802.11 b/g/n
● 1T1R 2.4 GHz with support for a 150 Mbps PHY data rate.
● DDR2 memory up to 1024 Mb.
● Flash memory up to 512 Mb.
● 4 LAN ports and 1 WAN port.
● Support USB2.0 slave device for USB disk and USB3G/4G dongle and USB camera.
● 24 STA-Proxy.
● Support in terface: SD-XC, I2C, PCM, I2S(192K/24bits), PWM, SPIslave, UAR T lite, GPIO.
● Security: WEP64/128, TKIP, AES, WPA, WPA2, WAPI.
● Support IoT gateway mode and IoT device mode.
● RoHS compliance meets environment-friendly requirement.
● Conform to FCC/CE/IC/RoHS certification standards.
● 40.5mm(L) x 25 mm(W) x 3.0 mm(H) dimension
SKW92B 、 SKW92B_E8 、 SKW92B_E16 、 SKW92B_E325 、 SKW92B_E321 、 SKW92B_E641 、 SKW92B series |
|
[ IoT (internet of things) ][ 3G/4G WiFi Router ][ USB WiFi Camera ][ Building Automation ][ Home Automation ][ Smart Home Gateway ][ Smart Lighting ][ Smart Plug ][ Industry Control ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
09-June-2021 |
|
V2.01 |
|
SL-18060058 |
|
1.2 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.