MAX2029 Evaluation Kit
●The MAX2029 evaluation kit (EV kit) simplifies the evaluation of the MAX2029 815MHz to 1000MHz RF fre-quency range, GSM/cellular base-station transmitter, or receiver application MAX2029 upconversion/downconver-sion mixer. It is fully assembled and tested at the factory. Standard 50Ω SMA connectors are included on the EV kit’s input and output ports to allow quick and easy evalu-ation on the test bench.This document provides a list of test equipment required to evaluate the device, a straight-forward test procedure to verify functionality, a description of the EV kit circuit, the circuit schematic, a bill of materials (BOM) for the kit, and images for each layer of the PC board.
■Features
●Fully Assembled and Tested
●50Ω SMA Connectors on Input and Output Ports
●815MHz to 1000MHz RF Frequency Range
●570MHz to 900MHz LO Frequency Range
●960MHz to 1180MHz LO Frequency Range (Refer to the MAX2029 Data Sheet)
●DC to 250MHz IF Frequency Range
●6dB/6.5dB (Upconverter/Downconverter) Conversion Loss
●36.5dBm/39dBm (Downconverter/Upconverter) Input IP3
●+25dBm/+27dBm (Upconverter/Downconverter) Input 1dB Compression Point
●6.7dB Noise Figure
●Integrated LO Buffer
●Integrated RF and LO Baluns
●Low -3dBm to +3dBm LO Drive
●Built-In SPDT LO Switch with 43dB LO1 to LO2 Isolation and 50ns Switching Time
●External Current-Setting Resistor Provides Option for Operating Mixer in Reduced Power/Reduced Performance Mode
|
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
3/21 |
|
REV 0 |
|
|
|
377 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.