Application Circuit of Low Noise Op-Amp TC75S67TU for Ultrasonic Distance Sensor Design guide
■This Design Guide (hereinafter referred to as this guide) describes designing ultrasonic distance sensors using a low-noise op-amp TC75S67TU. Ultrasonic distance sensors measure the round trip time until the transmitted ultrasonic wave is reflected by the object and returned, and calculate the distance. This guide describes TC75S67TU applied circuit designs, using an ultrasonic distance sensor integrated with transmitter and receiver as an example.
●Introduction
■Op-amps are still used in a variety of situations even today in the digital age, and a particularly important application is their use in a variety of sensors.
■There are various types of information that can be obtained from nature, such as sound and light, and there are various types of sensor elements accordingly. Generally, the output signal from a sensor element is very weak, and it is hard to handle as it is, so in most cases it is amplified and processed.
■Op-amps are used for this amplification. In addition to amplification, op-amps are used for filters and I-V conversion in various sensors, and it is not an overstatement to say that most modern electronic devices cannot be realized without an op-amp.
■Noise characteristics are important in applications with these sensors. If the op-amp itself is noisy, critical sensor signals may be masked by noise, resulting in a decrease in detection sensitivity or false detection, preventing the desired sensing performance from being attained. Therefore, the operational amplifiers used in such applications require low noise levels.
■In order to meet these requirements, Toshiba have developed an operational amplifier TC75S67TU with a low noise level of 6 nV/√Hz (@f=1 kHz, GV=40 dB, typical).
■This guide describes designing ultrasonic distance sensors using TC75S67TU. For more information on TC75S67TU, refer to the data sheet of the link destination below.
|
Onboard ultrasonic sensor 、 Onboard operational amplifier 、 Low Noise Op-Amp 、 LDO regulator 、 switching-diode |
|
|
|
|
|
Application note & Design Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
2020-03-10 |
|
|
Rev.11 |
|
|
RD162-DGUIDE-01 |
|
|
1.6 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
