DS1877 SFP Controller for Dual Rx Interface
●Features
■Meets All SFF-8472 Control and Monitoring Requirements
■Four Analog Monitor Channels: Temperature, VCC, RSSI1, RSSI2
RSSI1 and RSSI2 Support Internal and External Calibration Differential Input Common-Mode Range from GND to VCC Scalable Dynamic Range Internal Direct-to-Digital Temperature Sensor Alarm and Warning Flags for All Monitored Channels
■Two 10-Bit Delta-Sigma Outputs Each Controlled by 72-Entry Temperature LUT
■Digital I/O Pins: Four Inputs, Four Outputs
■Comprehensive Loss-of-Signal (LOS) Detection System
■Flexible, Two-Level Password Scheme Provides Three Levels of Security
■120 Bytes of Password-1 Protected Memory
■128 Bytes of Password-2 Protected Memory in Main Device Address
■256 Additional Bytes Located at A0h Slave Address
■Receiver 1 is Accessed at A2h Slave Address
■Receiver 2 is Accessed at B2h Slave Address
■I²C-Compatible Interface
■+2.85V to +3.9V Operating Voltage Range
■-40℃ to +95℃ Operating Temperature Range
■28-Pin TQFN (5mm x 5mm x 0.75mm) Package
[ SFF Transceiver Modules ][ SFP Transceiver Modules ][ SFP+ Transceiver Modules ][ Dual Rx Video SFPs ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
TQFN-EP;TQFN |
|
English Chinese Chinese and English Japanese |
|
4/10 |
|
Rev 1 |
|
19-5188 |
|
1.8 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.