MAX2150 Wideband I/Q Modulator with Sigma-Delta Fractional-N Synthesizer
The super-high-resolution sigma-delta fractional-N synthesizer is capable of better than 50mHz resolution when used with a 10MHz reference. Other features,fully differential l/Q modulation inputs, an internal LO buffer, and a 50Ω wideband output driver amplifier.
A standard 3-wire interface is provided for synthesizer programming and overall device configuration. An on-chip low-noise crystal oscillator amplifier is also included and can be configured as a buffer when an external reference oscillator is used.
The device typically achieves 34dBc of carrier and sideband suppress!on at a -1dBm output level. The wideband, internally matched RF output can also be disabled while the synthesizer and 3-wire bus remain powered up for continuous programming.
The device consumes 72mA from a single +3.0V supply and is packaged in an ultra-compact 28-pin QFN package (5mm x 5mm) with an exposed pad.
●Features
■Single Voltage Supply (2.7V to 3.6V)
■75MHz 3dB I/Q Input Bandwidth
■Wideband 50Ω RF Output: 700MHz to 2300MHz
■Ultra-Fine Frequency Resolution: 100mHz
■High Reference Frequency for Fast-Switching Applications
■Ultra-Low Phase Noise
■Low Spurious and Reference Emissions
■-1dBm RMS Output Power
■60dB RF Muting Control
■34dBc Typical Carrier Suppression
■34dBc Typical Sideband Suppression
■Software- and Hardware-Controlled Shutdown Modes
Wideband I/Q Modulator 、 complete wideband direct upconver-sion quadrature modulator IC 、 EV kit 、 modulator |
|
[ Wireless Broadband ][ Satellite Uplink ][ LMDS ][ Wireless Base Station ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
QFN;TQFN-EP |
|
English Chinese Chinese and English Japanese |
|
6/08 |
|
Rev 4 |
|
19-2389 |
|
228 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.