MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 900MHz Image-Reject Transceivers

2021-06-21
●The MAX2420/MAX2421/MAX2422/MAX2460/MAX2463 are highly integrated front-end ICs that provide the lowest cost solution for cordless phones and ISM-band radios operating in the 900MHz band. All devices incorporate transmit and receive image-reject mixers to reduce filter cost. They operate with a +2.7V to +4.8V power supply, allowing direct connection to a three-cell battery stack.
The receive path incorporates an adjustable-gain LNA and an image-reject downconverter with 35dB image suppression. These features yield excellent combined downconverter noise figure (4dB) and high linearity with an input third-order intercept point (IP3) of up to +2dBm. The transmitter consists of a variable-gain IF amplifier with more than 35dB control range, an image-reject upconverter with 35dB image rejection, and a poweramplifier (PA) predriver that produces up to +2dBm (in some applications serving as the final power stage).
All devices include an on-chip local oscillator (LO), requiring only an external varactor-tuned LC tank for operation. The integrated divide-by-64/65 dual-modulus prescaler can also be set to a direct mode, in which it acts as an LO buffer amplifier. Four separate powerdown in puts can be used for system power management, including a 0.5μA shutdown mode. These parts are compatible with commonly used modulation schemes such as FSK, BPSK, and QPSK, as well as freque ncy hopping and direct sequence spread-spectrum systems. All devices come in a 28-pin SSOP package.
For applications using direct VCO or BPSK transmit modulation, as well as receive image rejection, consult the MAX2424/MAX2426 data sheet. For receive-only devices, refer to the MAX2440/MAX2441 /MAX2442 data sheet.
●Features
■Receive/Transmit Mixers with 35dB Image Rejection
■Adjustable-Gain LNA
■Up to +2dBm Combined Receiver Input IP3
■4dB Combined Receiver Noise Figure
■>35dB of Transmit Power Control Range
■PA Predriver Provides up to +2dBm
■Low Current Consumption: 23mA Receive
▲26mA Transmit
▲9.5mA Oscillator
■0.5μA Shutdown Mode
■Operates from Single +2.7V to +4.8V Supply

Maxim

MAX2420MAX2421MAX2422MAX2460MAX2463MAX2420EAIMAX2421EAIMAX2422EAIMAX2460EAIMAX2463EAIMAX242_EAIMAX246_EAI

More

Part#

Image-Reject Transceivershighly integrated front-end ICsEV kit

More

Cordless Phones ]Spread-Spectrum Communications ]Wireless Telemetry ]Two-Way Paging ]Wireless Networks ]

More

Datasheet

More

More

Please see the document for details

More

More

SSOP

English Chinese Chinese and English Japanese

8/03

Rev 5

19-1234

242 KB

- The full preview is over. If you want to read the whole 14 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: