RF-BM-ND04 Bluetooth 5.0 Low Energy Module
■RF-BM-ND04 is an RF module based on Nordic BLE SoC nRF52832QFAA with ARM®Cortex®-M4 32-bit processor. It integrates a 32.768 kHzand a 32MHz crystal, an LC filter,an antenna matching and a meander line inverted-F PCB antenna. It features low power consumption, small size, robust connection distance, and rigid reliability. It supports BLE stack v5.0 and can be preprogrammed with a serial interface communication protocol for simple programming. 1.27-mm pitch stamp stick package for easy assembling and cost-effective PCB design.RF-BM-ND04 is pin-to-pin compatible with RF-BM-ND04C and RF-BM-ND05.
●Key Features:
■2.4 GHz transceiver
▲-963Bm sensitivity in Bluetooth®low energy mode
▲1 Mbps, 2 Mbps supported data rates(data of Chip nRF52832)
▲TX power:-20 to +4 dBm in 4 dB steps (data of Chip nRF52832)
▲Single-pin antenna interface
▲5.36mA peak current in TX (0 dBm)
▲5.4mA peak current in RX
▲RSSI (1 dB resolution)
■ARM®Cortex®-M4 32-bit processor, 64 MHz
▲215 EEMBC CoreMark® score running from flash memory
▲58μA/MHz running from flash memory
▲51.6μA/MHz running from RAM
▲Data watchpoint and trace (DWT), embedded trace macrocell (ETM), and instrumentation trace macrocell (ITM)
▲Serial wire debug (SWD)
▲Trace port
■Flexible power management (data of Chip nRF52832)
▲Supply voltage range 1.7 V~3.6 V
▲Fully automatic LDO and DC/DC regulator system
▲Fast wake-up using 64 MHz internal oscillator
▲0.3 μA at 3 V in OFF mode
▲0.7μA at 3 V in OFF mode with full 64kB RAM retention
▲1.9 μA at 3 V in ON mode, no RAM retention, wake on RTC
■Memory
▲512 kB flash
▲64 kB RAM
■Nordic SoftDevice ready
■Support for concurrent multi-protocol
■Type 2 near field communication (NFC-A) tag with wakeup-on-field and touch-to-pair capabilities
■12-bit, 200 ksps ADC -8 configurable channels with programmable gain
■64 level comparator
■15 level low power comparator with wakeup from System OFF mode
■Temperature sensor
■29general purpose I/O pins
■3x 4-channel pulse width modulator (PWM) units with EasyDMA
■Digital microphone interface (PDM)
■5x 32-bit timers with counter mode
■Up to 3x SPI master/slave with EasyDMA
■Up to 2x I²C compatible 2-Wire master/slave
■I²S with EasyDMA
■UART (CTS/RTS) with EasyDMA
■Programmable peripheral interconnect (PPI)
■Quadrature decoder (QDEC)
■AES HW encryption with EasyDMA
■Autonomous peripheral operation without CPU intervention using PPI and EasyDMA
■3x real-time counter (RTC)
RF-BM-ND02C 、 RF-BM-ND05I 、 nRF52810 、 nRF52811 、 nRF52832 、 nRF52840 、 RF-BM-ND05 、 RF-BM-ND06 、 RF-BM-ND01 、 RF-BM-ND02 、 RF-BM-ND01C 、 RF-BM-ND02CI 、 RF-BM-ND04 、 RF-BM-ND04I 、 RF-BM-ND04C 、 RF-BM-ND04CI 、 nRF51822 、 RF-BM-ND02I 、 RF-BM-ND04A 、 nRF51802 、 nRF52832QFAA 、 nRF51 Series 、 nRF52 Series 、 nRF51 、 nRF52 |
|
[ Internet of Things (IoT) ][ Internet Gateway ][ CloudConnectivity ][ Industrial Control ][ Home Automation ][ Smart Plug and Metering ][ Home Appliances ][ Wireless Audio ][ Access Control ][ IP Network Sensor Nodes ][ Security Systems ][ Wearables ][ Building automation ][ Retail ][ Sensor networks ][ Medical devices ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SMT |
|
English Chinese Chinese and English Japanese |
|
2020.03.31 |
|
V1.2 |
|
|
|
1.9 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.