RF-BM-ND05I Bluetooth 5.0 Low Energy Module
■RF-BM-ND05I is an RF module based on Nordic Bluetooth 5.0 / Bluetooth mesh / Thread / 802.15.4 / ANT / 2.4 GHz multiprotocol SoC nRF52840-QIAA-R with best-in-class 32-bit ARM®Cortex®-M4 processor. It integrates a 32.768 kHzand a 32MHz crystal, a power filter, an antenna matching, and an IPEX connector. It features high-performance digital interfaces, robust connection distance, and rigid reliability. It supports BLE stack v5.0 and can be preprogrammed with a serial interface communication protocol for simple programming. 1.27-mm pitch stamp stick package for easy assembling and cost-effective PCB design. RF-BM-ND05I is pin-to-pin compatible with RF-BM-ND04I.
●Key Features:
■Bluetooth 5.0, Bluetooth mesh, IEEE 802.15.4-2006, 2.4 GHz transceiver
▲-95 dBm conductive sensitivity in BLE mode
▲-103 dBm sensitivity in 125kbps BLE mode (long range)
▲+8 dBm TX power (down to -20 dBm in 4dB steps)
▲On-air compatible with nRF52, nRF51, nRF24L and nRF24AP series
▲Supported data rates:-Bluetooth ®5: 2 Mbps, 1Mbps, 500kbps and 125 kbps-IEEE 802.15.4-2006:250 kbps-Proprietary 2.4 GHz: 2Mbps, 1Mbps
▲Single-ended antenna output (on-chip balun)
▲128-bit AES/ECB/CCM/AAR co-processor (on-the-fly packet encryption)
▲4.8 mA peak current in TX (0 dBm)
▲4.6 mA peak current in RX
▲RSSI (1 dB resolution)
■ARM®Cortex®-M4 32-bit processor with FPU, 64 MHz
▲212 EEMBC CoreMark score running from flash memory
▲52 μA/MHz running from flash memory
▲Watchpoint and trace debug modules (DWT, ETM and ITM)
▲Serial wire debug (SWD)
■Rich set of security features
▲ARM®TrustZone®Cryptocell 310 security subsystem
▲Security boot ready
▲Secure erase
■Flexible power management
▲Supply voltage range:1.8V ~ 5.5 V
▲Automated peripheral power management
▲Fast wake-up using 64 MHz internal oscillator
▲0.4 μA at 3 V in System OFF mode, no RAM retention
▲1.5 μA at 3 V in System On mode, no RAM retention, wake on RTC
■1MB flash and 256 kB RAM
■Advanced on-chip interfaces
▲QSPI 32 MHz interface
▲High-speed 32 MHz SPI
▲Type 2 near field communication (NFC-A) tag with wake-on field-Touch-to-pair support
▲Programmable Peripheral interconnect (PPI)
▲29general purpose I/O pins
▲EasyDMA automated data transfer between memory and peripherals
■Nordic SoftDevice ready with support for concurrent multi-protocol
■12-bit, 200 ksps ADC -8 configurable channels with programmable gain
■64 level comparator
■15 level low-power comparator with wake-up from System OFF mode
■Temperature sensor
■4x 4-channel pulse width modulator (PWM) unit with EasyDMA
■Audio peripherals: I²S, digital microphone interface (PDM)
■5x 32-bit timer with counter mode
■Up to 4xSPI master/3x SPI slave with EasyDMA
■Up to 2x I²C compatible 2-wire master/slave
■2xUART (CTS/RTS) with EasyDMA
■Quadrature decoder (QDEC)
■3xreal-time counter (RTC)
RF-BM-ND02C 、 RF-BM-ND05I 、 nRF52810 、 nRF52811 、 nRF52832 、 nRF52840 、 RF-BM-ND05 、 RF-BM-ND06 、 RF-BM-ND01 、 RF-BM-ND02 、 RF-BM-ND01C 、 RF-BM-ND02CI 、 RF-BM-ND04 、 RF-BM-ND04I 、 RF-BM-ND04C 、 RF-BM-ND04CI 、 nRF51822 、 RF-BM-ND02I 、 RF-BM-ND04A 、 nRF51802 、 nRF52840-QIAA-R 、 nRF24L 、 nRF24AP series 、 nRF51 Series 、 nRF52 Series 、 nRF51 、 nRF52 、 nRF24AP |
|
[ Internet of Things (IoT) ][ Internet Gateway ][ Cloud Connectivity ][ Industrial Control ][ Home Automation ][ Smart Plug and Metering ][ Home Appliances ][ Wireless Audio ][ Access Control ][ IP Network Sensor Nodes ][ Security Systems ][ Wearables ][ Building automation ][ Retail ][ Sensor networks ][ Medical devices ][ Gaming controller ][ Remote controls ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
SMT |
|
English Chinese Chinese and English Japanese |
|
2020.03.31 |
|
V1.0 |
|
|
|
2.1 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.