XD7555 DIP8 / XL7555 SOP8 CMOS RC timers
Specifically, the XD/XL7555 and 7556 are stable controllers capable of producing accurate time delays or frequencies. The 7556 is a dual XD/XL7555, with the two timers operating independently of each other, sharing only V+ and GND. In the one shot mode, the pulse width of each circuit is precisely controlled by one external resistor and capacitor. For astable operation as an oscillator, the free running frequency and the duty cycle are both accurately controlled by two external resistors and one capacitor. Unlike the regular bipolar 555NE devices, the Control Voltage terminal need not be decoupled with a capacitor. The circuits are triggered and reset on falling (negative) waveforms, and the output inverter can source or sink currents large enough to drive TTL loads, or provide minimal offsets to drive CMOS loads.
●Features:
■ Exact equivalent in most cases for 555NE or XD555
■ Low supply current:
▲ XD/XL7555: 60μA
▲ 7556: 120μA
■ Extremely low input currents: 20pA
■ High speed operation: 1MHz
■ Guaranteed supply voltage range: 2V to 18V
■ Temperature stability: 0.005%/°C at +25°C
■ Normal reset function - no crowbarring of supply during output transition
■ Can be used with higher impedance timing elements than regular 555/556 for longer RC time constants
■ Timing from microseconds through hours
■ Operates in both astable and monostable modes
■ Adjustable duty cycle
■ High output source/sink driver can drive TTL/CMOS
■ Outputs have very low offsets, HIGH and LOW
■ Pb-free (RoHS Compliant)
[ Precision timing ][ Pulse generation ][ Sequential timing ][ Time delay generation ][ Pulse width modulation ][ Pulse position modulation ][ Missing pulse detector ] |
|
Datasheet |
|
|
|
Please see the document for details |
|
|
|
|
|
DIP8;SOP8 |
|
English Chinese Chinese and English Japanese |
|
|
|
|
|
|
|
856 KB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.