Kaye Validator®,Thermal Process Validation System
The Kaye Validator® is the latest generation in thermal validation systems. The Validator is a standalone thermal validation system designed to meet new regulations worldwide for validation processes. Combining Kaye’s precision thermal measurement hardware and data storage capability with proprietary Windows-based software, the Validator satisfies your calibration, qualification, and reporting requirements. When performing sensor calibration and qualification studies, you can operate the Validator in standalone mode or with a PC attached.
A complete Kaye Validator validation system includes:
•The Validator instrument
•The Validator software for Windows® 7 and XP
•A notebook or desktop PC (minimum Pentium 300 MHz with at least 256 MB RAM and Microsoft Office 2007, 2010 (32-bit only) or 2013, and a printer that supports both portrait and landscape page orientation
•Up to three Kaye Sensor Input Modules (SIMs)
•A Kaye high temperature reference (HTR 400), a Kaye low temperature reference (LTR-90, LTR -25/140 or LTR -45/140), or a Kaye cold temperature reference (CTR-80 or CTR-40)
•A Kaye Intelligent RTD probe (IRTD)
•Premium grade thermocouples
•Additional temperature and non-temperature sensors for qualification studies (optional)
•An Epson® LX-300 printer (optional) attached to the Validator for printing during sensor calibration and the qualification study.
Validator Benefits:
The Kaye Validator brings important benefits to the validation process:
•Designed to help meet FDA guidelines for protecting electronic data (21 CFR Part 11)
•Fully validated software, hardware, and firmware
•Measures and adjusts internal voltage continuously
•Flexibility to operate as standalone or with a PC during testing
•Built-in floppy disk drive (only in units built before July 2011) for loading setups, collecting data, and upgrading firmware
•Built-in USB flash drive interface for loading setups, collecting data, and upgrading firmware
•Over 2 MB internal memory to protect data in case floppy disk or flash disk fills up
•Battery backup for up to 30 minutes if system loses power
•Plug-in Sensor Input Modules minimize sensor handling and save calibration time
•More flexibility to set up your test—assign sensors to groups to perform independent calculations, perform distribution and penetration tests at the same time, or qualify multiple chambers
•Test results are stored in secure data files that can only be accessed through the Validator software
•Generate easy-to-read, spreadsheet formatted reports from a single, protected file: raw data is never modified
•Export qualification data to an Excel spreadsheet file
•Greater portability over other validation systems—weighs 20 pounds and includes a carrying case
•Network capabilities allow multiple PCs to store data files to the same location and use one centralized database for user ID/password maintenance.
|
|
|
|
User's Guide |
|
|
|
|
Please see the document for details |
|
|
|
|
|
|
|
|
|
|
|
English Chinese Chinese and English Japanese |
|
|
July 2014 |
|
|
Rev. K |
|
|
M4350E |
|
|
2.9 MB |
- +1 Like
- Add to Favorites
Recommend
All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.
Integrated Circuits
Discrete Components
Connectors & Structural Components
Assembly UnitModules & Accessories
Power Supplies & Power Modules
Electronic Materials
Instrumentation & Test Kit
Electrical Tools & Materials
Mechatronics
Processing & Customization
