GCD-SE SERIES Single Ended DC Gage Heads

PublishTime：2021-04-25

● The GCD-SE Series of heavy-duty DC operated gage heads enable high performance in environments containing moisture, dirt, and fluid contaminants. With a spring loaded LVDT, a precision linear bearing, and internal conditioning electronics operating on a single ended 8.5 to 28VDC input with minimal current draw, the GCD-SE is ideally suited to portable measurement applications in difficult environments. Internal EMI, ESD and RFI protection, provide CE compliance when correctly installed. Synchronous demodulation ensures unsurpassed noise rejection.
● These robust gage heads allow measurements over stroke ranges from 0 to 0.1 inch [2.54mm] up to 0 to 2 inches [50.8 mm]. The spring force is typically 9oz [255 grams] at fully compressed electrical stroke. A removable black-chromed, hardened tool steel tip is threaded (4-48UNF-2A) to the working end. Internal construction prevents the core and shaft from rotating as they move longitudinally. The integral electrical connector (welded) provides for easy installation and allows replacing a damaged cable without sacrificing the sensor. Installation and adjustment are facilitated by an external ½-20 mounting thread and the two locknuts supplied with each unit.
● Like in most of our LVDTs, the GCD-SE windings are vacuum impregnated with a specially formulated, high temperature, flexible resin, and the coil assembly is potted inside its housing with a two-component epoxy. This provides excellent protection against hostile environments such as high vibration and shock.
● The ruggedness, long life cycle, and very high reliability of the GCD-SE Series provide the lowest cost of ownership over the life of the equipment onto which they are installed. The one-piece front end (barrel which contains the bearing assembly), machined from solid stainless steel bar, coupled with a bronze bushing, has far greater resistance to bending forces and side loads compared to other designs. This is particularly important on the longer stroke versions; it reduces the common risk of probe damage/bending during installation or maintenance of industrial equipment. The GCD-SE Series designs also require fewer parts and weld joints, thereby increasing overall structural integrity and reliability.
● SPECIFICATIONS:
■ Hermetically sealed housing;
■ Single ended 8.5 to 24VDC supply;
■ Low current consumption (only 6mA);
■ Ideal for battery operation;
■ IEC IP68 rating to 1,000 PSI [70 bars];
■ Long strokes up to 2 inches;
■ Hardened tool steel contact tip;
■ High side load resistance.
● FEATURES:
■ All-welded stainless steel construction;
■ Resistant to harsh environments;
■ MS type connector (MIL-C-5015);
■ Long cycle life;
■ CE compliant;
■ Calibration certificate supplied with each unit;
■ Air extend/spring retract available (consult factory).

Brand of Product：	TE Connectivity
Part#：	GCD-SE 、 GCD-SE 100 、 GCD-SE 250 、 GCD-SE 500 、 GCD-SE 1000 、 GCD-SE 2000 、 GCD-SE Series 、 PSD 40-15 、 PT06A-10-6S 、 GC Series 、 GC 、 02351006-000 、 02351007-000 、 02351008-000 、 02351009-000 、 02351010-000 、 02291339-000 、 62101011-000 、 04290589-000 、 67010007-000 、 67010008-000 、 67010009-000 、 67010010-000 、 67010011-000 、 67010005-000 、 67010006-000 、 67010002-000 、 67010001-000 、 PT06A-10-6SSR More Part#
Product Category：	Single Ended DC Gage Heads More
Application：	[ Roller Gap Control ][ In-process Wet Grinding ][ Hand Held Gages ][ X-Y Positional Feedback ][ Automotive chassis track testing ][ Remote site monitoring ] More
Data Type：	Datasheet More
Safety & Environment Standards：	More
Operating Temperature：	Please see the document for details
Qualification Grade：	More
Qualification Approval：	More
Package：
Language：	English Chinese Chinese and English Japanese
Date of Creation：	07/2017
Version Number：	Rev. 8
Data Encoding：
Data Size：	389 KB

Data section preview(2pages)

- The full preview is over. If you want to read the whole 4 page document,please Sign in/Register -

Download

+1 Like
Add to Favorites

Recommend

Technical Resources

More>

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Integrated Circuits