OPL1000 ULTRA-LOW POWER 2.4GHZ WI-FI +BLUETOOTH SMART SOC

2021-04-06
●GENERAL DESCRIPTION:
■The OPL1000 SoC features a fully integrated 2.4GHz radio transceiver and baseb and processor for Wi-Fi 802.11b and Bluetooth® Smart applications. The SoC can be used as a standalone application-specific communication processor or as a wireless data link in hosted MCU systems where ultra-low power is critical. The OPL1000 supports flexible memory architecture for storing profiles, stacks and custom application codes, and can be updated using Over-The-Air (OTA)technology. Qualified Bluetooth Smart protocol stack and Wi-Fi TCP/IP stack are stored in a dedicated ROM. The OPL1000 is equipped with dual processors, ARM® Cortex®-M0 and M3, for handling different processes. All software runs on the ARM® Cortex®-M0 processor while more intensive application-specific activities run on the ARM® Cortex®-M3 processor. The OPL1000 can be connected to any external MCU through SPI, I2C or UART interfaces and sensors or other devices through GPIOs. The transceiver interfaces directly to the antenna and is fully compliant with the Wi-Fi 802.11b and Bluetooth 5.0 BLE standards. With integrated antenna switch, RF balun, power amplifier (PA) and low noise amplifier (LNA),the OPL1000 allows both Wi-Fi and Bluetooth Smart to minimize PCB design area and external component requirement.

Opulinks

OPL1000OPL1000A2

More

Part#

SoCULTRA-LOW POWER 2.4GHZ WI-FI +BLUETOOTH SMART SOC

More

More

Datasheet

More

More

Please see the document for details

More

More

QFN;QFN48

English Chinese Chinese and English Japanese

08/13/2020

Version 1.1

DS0-04-1.1

1.1 MB

- The full preview is over. If you want to read the whole 30 page document,please Sign in/Register -
  • +1 Like
  • Add to Favorites

Recommend

All reproduced articles on this site are for the purpose of conveying more information and clearly indicate the source. If media or individuals who do not want to be reproduced can contact us, which will be deleted.

Contact Us

Email: